Loading ...
Loading ...
Loading ...
Settings
40
Running a RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be
provided in the Miele App.
A message will appear in your
dishwasher display if a software update
is available.
You can install the update immediately
or postpone this until later. When the
appliance is switched on again, you will
be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
-You will only receive a message when
an update is available.
-Once an update has been installed, it
cannot be undone.
-Do not switch the dishwasher off
during the update. Otherwise, the
update will be aborted and will not be
installed.
-Some software updates can only be
carried out by a Miele service
technician.
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme, and the actual
consumption after the end of the
programme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
run on your dishwasher to date (see
“Caring for the environment -
EcoFeedback consumption display“).
DisplayingConsumption
Select the Consumption displaymenu
option and confirm with OK.
Select the setting you want and
confirm with OK.
DisplayingTotal consumption
Select the Total consumptionmenu
option and confirm with OK.
You can display the values for Energy
and Water using the buttons.
You can also reset the values for the
total consumption to 0.
Select the Resetmenu option and
confirm with OK.
Select the Yesmenu option and
confirm with OK.
Confirm the message with OK.
The values are now reset to 0.
Loading ...
Loading ...
Loading ...