Loading ...
Warranty ....................................... 2
Safety Rules .................................... 2
Operation .................................... 2-4
Maintenance .................................... 4
Troubleshooting ................................. 5
Parts Illustration and List ......................... 6-7
EspaSol ..................................... 8-11
FULL ONE YEAR WARRANTY ON CRAFTSMAN
FINISH NAILER
If this Craftsman air-drive tool fails due to a defect in material
or workmanship within one full year from the date of purchase,
return it to the nearest Sears Service Center in the United
States, and Sears will repair it free of charge.
If this air-drive tool is used for commercial purposes, this
warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL
60179
• Air tool operators and all others in work area should
always wear safety goggles complying with United States
ANSI Z87.1 to prevent eye injury from fasteners and flying
debris when loading, operating or unloading this tool.
• Never exceed operating pressure of 100 PSI.
• Always keep hands and body away from the fastener dis-
charge area when air supply is connected to tool.
• Always disconnect tool from air supply when servicing or
adjusting tool and when tool is not in use.
• Do not operate when contact trip is not in contact with
work.
• Never load the tool until you are ready to use it.
• Never depress tool trigger when loading.
• Always load with nose of tool pointing away from you and
others.
• Never point tool at yourself or others.
• Never carry tool with trigger depressed.
• Do not use oxygen, combustible gas or high pressure
compressed gas as the air supply for the tool.
• Always use tool at safe distance from other people in work
area.
• Do not attempt to discharge fastener into hard or brittle
materials such as concrete, steel or tile.
• Do not connect female quick-disconnect coupling to tool
side of air line.
• Connect male, free-flow nipple to tool side of air line so
that tool is depressurized when disconnected from hose.
• Do not use a hose swivel with this tool.
• Use Sears recommended fasteners only.
Refer to Figures 1,2, 3, 4 and 5.
DESCRIPTION
The Craftsman 16 Gauge Finish Nailer drives nails from 3A"to
2W' long. Die cast aluminum, textured finish body with cush-
ion grip minimizes operator fatigue. Large capacity, top load-
ing magazine makes loading easy. Safety feature disables tool
unless contact trip is pressed against workpiece. Tapered
nosepiece provides operator with greater visibility for precise
fastener placement. Quick release nose cover allows easy
access to jammed fasteners. Adjustment knob controls depth
of fastener. Air deflector can be adjusted to any direction. The
16 Gauge Finish Nailer is excellent for interior and exterior
trim work, door and window manufacturing, furniture making
and cabinetry.
SPECIFICATIONS
Capacity ............................ 110 finish nails
Nail size ..................... 16 gauge (.062" x .052")
Nail lengths ............................... 3Ato 21/2''
Operating pressure ....................... 60-100 PSI
Air inlet ................................. W' N.RT.F.
Length....................................... 12"
Height ..................................... 111/2"
Width ........................................ 3"
Weight.................................... 4.1 Ibs.
FINISH NAILS
18345 ................... 16 gauge finish nails, 3A"long
18344 .................. 16 gauge finish nails, 1W' long
18346 .................. 16 gauge finish nails, 1W' long
18347 ................... 16 gauge finish nails, 2" long
18368 .................. 16 gauge finish nails, 2W' long
AIR SUPPLY LINE
Refer to Figure 1 (page 3).
° The air tool operates on compressed air at pressures from
60 to 100 PSI.
° Never exceed maximum pressure.
Air Delivery Required: 1.41 SCFM @ 90 PSI
(30 shots per minute).
WARNING: Keep hands and body away from discharge area
of tool when connecting air supply. Always disconnect tool
from air supply when servicing or adjusting tool and when tool
is not in use.
° Air operated tools require clean, dry, lubricated com-
pressed air to ensure top performance, low maintenance
and long life.
° Dirt and abrasive materials present in all air lines will dam-
age tool O-rings, valves and cylinders.
° Moisture will reduce tool performance and life if not
removed from compressed air.
° A filter-regulator-lubricator system is required and should be
located as close to tool as possible (see Figure 1, page 3).
A distance of less than 15 feet is recommended.
° Keep air filter clean. A dirty filter will reduce the air pressure
to the tool causing a reduction in power and efficiency.
2
Loading ...
Loading ...
Loading ...