Loading ...
Loading ...
Loading ...
BISSELL.com 5
ATTENTION
• This machine is designed to be used on sealed hard floors.
• Do not overwet hardwood floors. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.
Cleaning Your Floors
Go to support.BISSELL.com for how-to videos and cleaning tips.
1. Recline the machine. Press
the power button ON.
Note: The unit must be
reclined before power button
will activate.
2. Press the WATER FLOW
button to switch between LO
and HI Modes.
LO Mode: Blue light solid
HI Mode: Blue light solid
3. Solution will dispense
automatically. Make forward
and backward passes to clean
your floors.
4. The dirty water tank
indicator will flash red when
tank is full or removed.
5. Turn the machine OFF by
pressing the power button and
return machine to the upright
position.
Cleaning with Hard Floor Sanitize Formula
Please read “DIRECTIONS FOR USE” on Hard Floor Sanitize label. Use on hard nonporous floors only.
1. Remove visible soil before
cleaning. In HI Mode, make
forward and backward passes.
2. Allow floor to remain
visibly wet with formula for
five minutes. This may require
additional passes in HI mode.
3. In HI Mode, make forward
and backward passes to
extract formula.
Loading ...
Loading ...
Loading ...