Loading ...
Loading ...
Loading ...
Installation Instructions
(continued)
Installation in a double-hung sash window
1. Cut the foam seals(adhesive type) to the proper lengths and attach them
to the window and stool. (Fig. 12)
2. Attach the window slider kit to the window stool. Adjust the length of
the window slider kit according to the width of window. Cut the adjustable
window slider kit if the width of window is less than 67.5cm (Fig. 14).
Open the window sash and place the window slider kit on the window
stool. (Fig. 13)
4. Close the window sash securely against the window slider kit. (Fig. 15)
5. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and outer window sash, as shown in Fig.16.
"__ndow slider kit
Windowstool Fig. 15
Foamseal
Fig, 16
Fig, 12
Windowstool Fig, 13
Cutthis sideto fit your window
I
Fig, 14
Installation in a sliding sash window
1. Cut the foam seals(adhesive type) to the proper lengths and attach them
to the window frame. See Fig.17.
2. Attach the window slider kit to the window stool. Adjust the length of
the window slider kit according to the height of window. Cut the adjustable
window slider kit if the height of window is lessthan 67.5cm (Fig. 14).
Open the window sash and place the window slider kit on the window
stool. See Fig.18.
4. Close the sliding sash securely against the window slider kit. (Fig. 19)
5. Cut the foam seal to an appropriate length and seal the open gap
between the sliding sash and outer window sash, as shown in Fig.20.
Fig, 19
Foam seal
Fig, 20
slider kit
Foam seal
7 (adhesive type)
Fig, 17
67,5cm<23cm
Windowstool
Fig. 18
02009 Electrolux Home Products, Inc. All rights reserved.
Loading ...
Loading ...
Loading ...