Loading ...
Loading ...
Loading ...
8
5.5 Working environment condition of the permanent magnetic lifter A. The
temperature is not higher than 80 ℃(-40 ℃ to 80 ℃).
B. No violent shake or impact.
C. No metal erosion metal agent around the environment.
5.6 When hoisting work piece, be sure to hoist the gravity center of the work piece
to guarantee the balance, then the switch the handle from off to on, and confirm
the slide-key of handle is locked and then begin hoisting, the lifter shouted move
smoothly to avoid shake that may cause work piece drop and accident.
5.7 If it is used to hoist column-shape work piece, please be sure to make the
V-shape on the lifter bottom contact with the work piece, but the hoisting capacity
is only 30%-50% of the rate hoisting capacity.(The decrease of hoisting capacity
is related to the diameter of the column work piece.
5.8 After hoisting operation, please detach the slide-key of the handle from the
positioning lock, then recover the handle to the free position shut off and take
down the lifter.
5.9 Consider the core when lifting the long shape work piece, the length should
not above 2mm in principle or use more lifter, as the picturer.
Loading ...
Loading ...
Loading ...