Loading ...
Loading ...
2
1. The maintenance and safety
Read this material before using this product. Failure to do so can result in serious
injury. SAVE THIS MANUAL
1.1 The idle load of the permanent lifter is forbidden. Empty loading is strictly
prohibited! Prevent the handle from rebounding and hurting people!
1.2 The permanent magnetic lifter must work within the rated weight. It is
forbidden for over loading to avoid an accident.
1.3 It is forbidden to stand under or through the hoisted work piece during
operation.
1.4 When the work piece is in the air during operation, the moving operation can
be started.
1.5 Do not turn the handle when the lifter bottom hasn't magnetized work piece.
1.6 Please check the slide-key and positioning-bolt regularly to guarantee reliable
lock and safety.
1.7 Keep the absorbing surface clean and flat. Remove the impurity on the
surface.
1.8 Do not strike and impact the permanent magnetic lifter during operation, these
may influence its performance.
1.9 Please demarcate and test the lifter every two years after putting into use to
ensure safety.
1.10. The height of lifting heavy objects should not be higher than 1 meter.
1.11. The product should be adsorbed at the center of gravity of the heavy object,
and the adsorption surface should not deviate from the center by 5cm, so as to
prevent the object from tilting, falling off and hurting people when lifting the heavy
object.
1.12. Before storage, antirust oil shall be wiped on the adsorption surface to
prevent rust.
2.Main Usage and characteristics
The permanent magnetic lifter of the PML series is mainly used to magnetize
plant shapes or column ironware materials and work pieces. The permanent
magnetic lifter of the PML series is mainly used to magnetize plant shapes or
Loading ...
Loading ...
Loading ...