Loading ...
Loading ...
Loading ...
- 14 -
MAINTENANCE
Keep the maintenance of the machine tool during the operation to
guarantee the accuracy and service life of the machine tool.
1. In order to retain the machine's precision and functionality. it is essential
to treat it with care. Keep it clean and grease and lubricate it regularly.
Only through good care. You can be sure that the working quality of the
machine will remain constant.
NOTES: Disconnect the machine plug from the mains supply whenever
you carry out cleaning, maintenance or repair work!
Oil, grease and cleaning agents are pollutants and must not be disposed of
through the drains or in normal refuse. Dispose of those agents in
accordance with current legal requirements on the environment. Cleaning
rags impregnated with oil, grease and cleaning agents are easily
inflammable. Collect cleaning rags or cleaning wool in a suitable closed
vessel and dispose of them in an environmentally sound way - do not put
them with normal refuse!
2. Lubrication all slide ways lightly before every use.
3. During the operation. The chips which fall onto the sliding surface
should be cleaned timely. and the inspection should be often made to
prevent chips from falling into the position between the machine tool
saddle and lathe bed guide way. Asphalt felt should be cleaned at certain
time.
4. After the operation every day. Eliminate all the chips and clean different
parts of the machine tool and apply machine tool oil to prevent rusting.
5. In order to maintain the machining accuracy. Take care of the center.
The surface of the machine tool for the chuck and the guide way and
avoid mechanical damage and the wear due to improper guide.
6. If the damage is found. The maintenance should be done immediately.
NOTES: Repair work may only be carried out by qualified personnel with
the corresponding mechanical and electrical knowledge.
Loading ...