Loading ...
Loading ...
Loading ...
- 9 -
UNPACKING AND CLEANING
1. Remove the woodworking lathe from the box
2. Check all the accessories of the machine tool according to the packing
list.
3. Choose a location for the lathe that is dray, has good lighting and has
enough room to be able to service the lathe on all four sides.
4. To avoid twisting the bed, the lathe's location must be absolutely flat and
level. Bolt the lathe to the stand (if used).
5. Clean all rust protected surfaces using a mild commercial solvent,
kerosene or diesel fuel. Do not use paint thinner, gasoline or lacquer
thinner. These will damage painted surfaces. Cover all cleaned surfaces
with a light film of 20W machine oil.
Loading ...
Loading ...
Loading ...