Loading ...
Loading ...
Loading ...
Aug,17. 2009 11'11AM Wa.ter]ooGrand No.1181
i ii II II I i
]4
P. ?
FIG. 1
CASTER,INSTALLATION: (Rollaway only)(Fig. 1)
Note: Swivel casters with brake (14) should be mounted on the same.sideof the rollaway
as the side handle (2), Fixed casters (15) are mounted opposite. Caster axles should
be lubricated periodically for continued good performance.
1) Lay cabinet down on its back side.
2) Position caster on caster channel and line up holes.
3) Insert four 5/16-18 x 3/4 screws (C) througll holes in caster; caster channel and into
weldnuts in bottom of rollaway. Finger tighten.
4) Repeat steps 2 and 3 to attach remaining casters.
5) Wrench tighten all screws.
6) Turn cabinet to an upright position.
211.....3
/
FIG,, 2
SIDE HANDLE INSTRUCTIONS:(Rollaway only)(Fig. 2)
Note: Holes in the handle are tapped therefore nuts are not necessary for installation.
1) Align handle (2) with holes on side of rollaway.
2) Using 14-10 × 5/8 screws (B) in each hole, tighten with a screwdriver.
3) Insert plug (3) in each end of handle and press tight,
6
Loading ...
Loading ...
Loading ...