Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19345386_xhu02m1/bg9.png)
9 ENGLISH
To cut a hedge side evenly, it helps to cut from the
bottom upwards.
Trim boxwood or rhododendron from the base toward
the top for a nice appearance and good job.
Installing or removing chip receiver
(optional accessory)
CAUTION:
• Always be sure that the tool is switched o and
unplugged before installing or removing chip
receiver.
NOTE:
• When replacing the chip receiver, always wear
gloves so that hands and face does not directly
contact the blade. Failure to do so may cause
personal injury.
• Always be sure to remove the blade cover
before installing the chip receiver.
• The chip receiver receives cut-o leaves and
alleviates collecting thrown-away leaves. This
can be installed on either side of the tool.
1
2
3
4
► 1. Press 2. Chip receiver 3. Nut 4. Shear blade
Press the chip receiver on the shear blades so that its
slits overlap with the nuts on the shear blades.
1
1
2
2
3
3
► 1. Hooks 2. Fit the hooks into groove 3. Grooves
At this time, the chip receiver needs to be installed so
that its hooks t into grooves in the shear blade unit.
1
2
► 1. Press the levers on both sides 2. Unlock the
hooks
To remove the chip receiver, press its lever on both
sides so that the hooks are unlocked.
CAUTION:
• The blade cover (standard equipment) cannot
be installed on the tool with the chip receiver
being installed. Before carrying or storing, unin-
stall the chip receiver and then install the blade
cover to avoid blade exposure.
Loading ...
Loading ...
Loading ...