Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19345386_xhu02m1/bg8.png)
8 ENGLISH
OPERATION
CAUTION:
• Be careful not to accidentally contact a metal
fence or other hard objects while trimming. The
blade will break and may cause serious injury.
• Overreaching with a hedge trimmer, particularly
from a ladder, is extremely dangerous. Do not
work from anything wobbly or inrm.
NOTICE: Do not attempt to cut branches thicker
than 10 mm (3/8") in diameter with the tool. Cut
branches to 10 cm (4") lower than the cutting height
using branch cutters before using the tool.
(1)
(2)
► (1) Cutting height (2) 10 cm (4")
CAUTION:
• Do not cut o dead trees or similar hard objects.
Failure to do so may damage the tool.
Hold the trimmer with both hands and pull the switch
trigger A or B and then move it in front of your body.
1
2
3
► 1. Trimming direction 2. Hedge surface to be
trimmed 3. Tilt the blades
As a basic operation, tilt the blades towards the trim-
ming direction and move it calmly and slowly at the
speed rate of 3 - 4 seconds per meter.
1
► 1. String
To cut a hedge top evenly, it helps to tie a string at the
desired hedge height and to trim along it, using it as a
reference line.
Attaching the chip receiver (optional accessory) on the
tool when trimming the hedge straight can avoid cut o
leaves’ being thrown away.
Loading ...
Loading ...
Loading ...