Loading ...
Loading ...
Loading ...
Maintenance
Introduction
WARNING: Before you do any
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
WARNING: Remove the battery before
you do maintenance.
The following is a list of the maintenance steps that you
must do on the product.
Maintenance Daily Weekly Monthly
Clean the external parts of the product with a dry cloth. Do not use water. X
Examine that the start and stop button works correctly and is not damaged. X
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
X
Make sure that all controls work and are not damaged. X
Keep the handles dry, clean and free from oil and grease. X
Make sure that the cutting attachment is not damaged. Replace the cutting
attachment if it is damaged.
X
Make sure that the cutting attachment guard is not damaged. Replace the cut-
ting attachment guard if it is damaged.
X
Make sure that the screws and nuts are tight. X
Make sure that the battery release buttons on the battery works and locks the
battery in the product.
X
Examine that the battery charger is not damaged and function correctly. X
Make sure that the battery is not damaged. X
Make sure that the suspension ring is not damaged. X
Make sure that the handle and the handlebar is not damaged and attached
correctly.
X
Make sure that the blade is correctly centered, is sharp, and not damaged. An
off-center blade will cause vibration that could result in damage to the product.
X
Make sure that the locknut of the cutting equipment is tightened correctly. X
Make sure that the transport guard for the blade is not damaged and that the
transport guard can be attached correctly.
X
Examine all couplings and connections. Make sure they are not damaged and
free from dirt.
X
Examine the vibration damping elements and make sure that they are not dam-
aged.
X
Make sure that the bevel gear is filled correctly with grease, see
To lubricate the
bevel gear on page 26
. If not, use Husqvarna bevel gear grease.
X
Lubricate the drive shaft end in the lower shaft coupling. X
24 609 - 009 - 15.09.2022
Loading ...
Loading ...
Loading ...