Husqvarna 535IRXT Brushcutter

Operator's Manual - Page 20

For 535IRXT.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
1. Push the mode button to set a limit to the maximum
speed. The white LEDs comes on to show that the
function is on.
2. Press the Mode button again to choose the next
speed level.
To extend the trimmer line with the
ErgoFeed function (535iRXT)
CAUTION: Do not hit the ground with
the trimmer head to extend the trimmer line.
The product has a function that extend the trimmer line
when the ErgoFeed button is pushed. The ErgoFeed
function decrease the wear on the trimmer head. It
also decreases accidental line supply that can occur
when you hit objects, for example, stones and/or hard
surfaces.
Push the ErgoFeed button to start the automatic
adjustment of the trimmer line.
Automatic shutdown function
The product has a shutdown function that stops the
product if the product is not used. The green LED for
start/stop indication goes off and the product stops after
180 seconds.
Blade thrust
A blade thrust is when the product moves to the side
quickly and with force. A blade thrust occurs when the
grass blade hits or catches on an object that cannot be
cut. A blade thrust can eject the product or operator in
all directions. There is a risk of injury to the operator and
bystanders.
The risk increases in areas where it is not easy to see
the material that should be cut.
Do not cut with the area of the blade that is shown in
grey in the illustration. The speed and movement of the
blade can cause blade thrust. The risk increases with
the thickness of the stem that is cut.
General work instructions
WARNING: Be careful when you cut a
tree that is in tension. It can spring back to
its normal position before or after the cut and
hit you or the product, and cause injury.
Clear an open space at one end of the work area,
and start the work from there.
Move in a regular pattern across the work area.
Move the product fully to the left and right, to clear a
width of 4–5 m on each turn.
Clear a length of 75 m before you turn and go back.
Move in a direction where you do not go across
ditches and obstacles more than necessary.
20
609 - 009 - 15.09.2022
Loading ...
Loading ...
Loading ...