Loading ...
Loading ...
Loading ...
28
Problem Possible Causes What To Do
Unsatis-
factory
washing
result
The dishes
are not clean
The dishes were not
loaded correctly.
See notes in “Loading the Dishwasher Baskets”.
The programme was not
powerful enough.
Select a more intensive programme.
See “Wash Cycle Table”.
Not enough detergent was
dispensed.
Use more detergent, or change detergent.
Items are blocking the path
of spray arms.
Rearrange the items so that the spray can rotate freely.
The Filter Assembly in the
base of wash cabinet is
not clean or is not correctly
fi tted.
This may cause the spray
arm jets to get blocked.
Clean and/or fi t the fi lter combination correctly.
Clean the spray arm jets. See “Cleaning the Spray
Arms”.
Cloudiness
on glassware
Detergent is too much Use less detergent and select a shorter cycle to wash
the glassware to get them clean.
Black or grey
marks on the
dishware
Aluminium utensils
have rubbed against the
dishware.
Use a mild abrasive cleaner to eliminate those marks.
Detergent
left in
dispenser
Dishes block Detergent
Dispenser.
Re-load the dishes properly.
Unsatis-
factory
drying
result
The dishes
are not
drying
Improper loading. Load the Dishwasher as suggested in the directions.
Too little rinse-aid. Increase the amount of rinse-aid/refi ll the rinse-aid
dispenser.
Dishes are removed too
soon.
Do not empty the Dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the Dishwasher only once
the dishes have suffi ciently cooled.
Empty the low basket fi rst. This prevents water from
dropping from the dishes in the Upper Basket.
Wrong programme has
been selected.
In a short programme the washing temperature is
lower. This also lowers cleaning performance. Choose
a programme with a longer washing time.
Use of cutlery with a low-
quality coating.
Water drainage is more diffi cult with these items.
Cutlery or dishes of this type are not suitable for
washing in the Dishwasher.
Troubleshooting
Loading ...
Loading ...
Loading ...