Loading ...
Loading ...
Loading ...
11
MAINTENANCE & ADJUSTMENTS GUIDE
Cleaning the SUNNY TreadPad:
• Unplug the SUNNY TreadPad from the electrical source before you begin.
• Pour a small amount of gentle detergent on a cotton rag or towel. Do not pour the detergent on
the running belt directly and do not use acidic or corrosive cleaners.
• Wipe down the frame, motor encasement, and running belt. Do not wipe underneath the
running belt.
• After long periods of use, it is normal for dust to accumulate. Please wipe all dust off gently.
Adjusting the Running Belt:
• Start the SUNNY TreadPad and set the speed at 2.5 mi/h.
• If the running belt moves to the left: Turn the left adjusting screw half-turn clockwise.
• If the running belt moves to the right: Turn the right adjusting screw half-turn clockwise.
• If the running belt is slipping: Turn both left and right adjusting screws half-turn clockwise at
same time.
• Check if an adjustment is needed after using the SUNNY TreadPad for 1 to 2 minutes.
Lubricating the Running Belt:
• Unplug the SUNNY TreadPad from the electrical source before you begin.
• Lift up the running belt and apply the silicone lubricant underneath the surface of the running
belt.
• Power on the SUNNY TreadPad.
• Allow the Sunny TreadPad to operate at 2.5 mi/h for 10 to 20 seconds.
• Do not add more than 5 ml - 10 ml of lubricant. Excessive lubricate will cause the running belt
to slip.
• Apply silicone lubricant once every 3 months.
Loading ...
Loading ...
Loading ...