Loading ...
Loading ...
Loading ...
- 9 -
6. If the machine cannot strip the wire, there may be several reasons:
① The diameter of the stripped wire is too small (the diameter of the wire to
be treated, including the outer skin, shall not be less than 1.5mm)
② The center of the blade is not on the same line as the center of the
rolling gear
③ The blade is not sharp
NOTE: Never put your hand in when the machine is running (you must stop
the machine before checking, debugging, and troubleshooting the
machine). To avoid cutting your hand, do not touch the blade directly with
your hand.
Loading ...
Loading ...
Loading ...