Loading ...
Loading ...
Loading ...
- 8 -
4.When stripping, adjust the height of the feeding plate according to the
thickness and hardness of the wire (generally, the feeding panel should be
adjusted for thick wire and hard wire and lower for soft wire and thin wire).
In this way, the wire is not easy to be eccentric when stripping
5. When the diameter of the wire to be treated does not exceed 20mm, the
two rolling gears need not be separated
When the diameter of the wire to be treated exceeds 20mm, the two rolling
gears need to be separated by loosening the two screws in the gears.
Loading ...
Loading ...
Loading ...