Loading ...
Loading ...
Loading ...
14
Operation
Oven
Oven Pilot Ignition
1. Open oven door. Depress thermostat control knob and
rotate anti-clockwise to ‘PILOT’ position.
2. With gas control knob depressed, press piezo ignition
button to ignite pilot burner. Repeat Items 1 to 2 until
pilot is lit.
3. Release gas control knob approximately 10-20 seconds
after lighting pilot, until pilot thermocouple is heated up
by pilot flame.
4. Pilot should now remain alight. If pilot does not light,
repeat Items 1 to 3 above.
5. View pilot burner through holes in front of burner box
with oven door open. See Fig 4.
Oven - Main Burner / Thermostat
1. With pilot burner alight, rotate thermostat control knob anti-clockwise to desired oven temperature
setting required, this will regulate gas supply to burner.
2. To turn main burner ‘OFF’, simply turn thermostat control knob clockwise to ‘OFF’ position.
Turning the Oven to ‘Standby’ (Pilot ‘ON’ Only)
1. To turn off oven burner / heating, set oven thermostat to ‘PILOT’ position, this will turn oven ‘OFF’,
but leave oven pilot burner ‘ON’.
2. In this position pilot burner will remain alight, but main burner will not operate until thermostat
control knob is set to a temperature.
3. If pre-heating of oven is required, set thermostat control knob to temperature 190°C and allow 20
minutes before cooking in oven to allow oven to warm up.
Oven ‘Shut-Down’
1. To turn oven to ‘PILOT’ position only, rotate thermostat control knob clockwise until pilot position is
reached. In this position only pilot burner will remain on.
2. To ‘Shut Down’ oven, depress and turn thermostat control knob to ‘OFF’ position. This will turn
‘OFF’ oven and extinguish pilot burner. To re-light pilot burner, refer to ‘Oven Pilot Ignition’ in this
section.
Pilot Burner
viewing holes
Fig 4
! IMPORTANT
DO NOT USE aluminium foil or trays directly on cast iron sole plate(s). NEVER
block or cover openings on each side of sole plate(s).
IMPORTANT:
Should any abnormal operation like;
- ignition problems,
- abnormal burner flame,
- burner control problems,
- partial or full loss of burner flame in normal operation, appliance requires IMMEDIATE
service by a qualified service person and should not be used until a service is carried out.
Be aware that when opening the oven door, hot air and cooking vapours will
be released from the hot oven.
Caution
Loading ...
Loading ...
Loading ...