Loading ...
Loading ...
Loading ...
- 4 -
equipment while it is under a load.
a. All moving parts of the equipment should be regularly cleaned.
b. Lubricate parts as required by the manufacturer’s specifications. The
type of lubricant should be as specified by the manufacturer or a qualified
person. Lubrication systems should be checked to verify proper operation.
c. If additional maintenance is required, it should be completed in
accordance with the instructions of the manufacturer or qualified person.
Inspection
You should inspect the product for damage, wear, broken or missing parts
(e.g.: pins) and that all components function before each use. Follow
lubrication and storage instructions for optimum product performance.
Check the climbing pins to make sure that they are not worn or damaged.
Check that everything is good working condition and that nothing is
blocking the holes. Do not use the equipment unless it is in good working
condition.
Binding
If the product binds while under a load, use equipment with equal or a
larger load capacity to lower the load safely to the ground. After un-binding;
clean, lubricate and test that equipment is working properly. Rusty
components, dirt, or worn parts can be causes of binding Clean and
lubricate the equipment as indicated in the lubrication section. Test the
equipment without a load. If the binding continues, contact Customer
Service.
IF YOUR EQUIPMENT BINDS
As your equipment becomes older, the threads may start binding. This will
prevent the equipment from operating properly and safely. Rusty threads,
dirty threads, or a worn threads can cause binding. Clean and lubricate the
equipment. Test the equipment without a load. If the binding continues,
Loading ...
Loading ...
Loading ...