Shure MV7-K-BNDL MV7 Podcast Microphone Bundle

User Manual - Page 11

For MV7-K-BNDL.

PDF File Manual, 18 pages, Read Online | Download pdf file

MV7-K-BNDL photo
Loading ...
Loading ...
Loading ...
Shure Incorporated
11/18
Advanced Mic Settings
Fine-tune your sound with limiter, compression, and equalizer settings.
Limiter
Toggle the limiter on or off to prevent distortion from volume peaks in your recording.
Compressor
Choose no compression, or select light, medium or heavy compression to control volume when your sound source is dynamic.
Quiet signals are boosted and loud signals are lowered, resulting in a denser, louder sound.
MV7 Tips
Control your Levels
To ensure consistent volume levels, keep the microphone as close to your face as possible.
Use Lock Mode to Lock In Your Sound
Whenyou'vetestedyouraudioandhavefoundthesettingsthatsoundgreat,pressandholdbothMuteandMonitor Togglefor
2 seconds to lock and prevent accidental adjustment and ensure that your audio remains consistent.
Monitor Your Sound
To hear your audio, plug headphones into the headphone output on your MOTIV device.
Troubleshooting
Issue Solution
Microphone is plugged in,
but not detected.
Unplug and reconnect the cable so that the app recognizes the microphone. You'll know that
theconnectionismadewhenyouseethedesktopapplicationdisplaythecorrectmicro-
phone settings.
You hear no audio even
though the desktop appli
cation is displaying the
correct microphone.
Check the Monitor Mix blend. Move the Monitor Mixslidertothecentertoheartheaudiogo-
ing into the mic and the audio being played back at the same time.
Audio is distorted (Auto
Level Mode)
Select Auto Level Mode to allow the software to control audio settings. Nearforup-closeap-
plications (1-6 in. / 2.54-15 cm) and Far for a distance of 6-18 inches. (15-45 cm)
Audio is distorted (Manual
Mode)
Audio distortion usually comes from overloading the microphone which causes clipping.
Lower your mic gain for the best sound recording.
Headphone LED flashes.
Audio sounds higher or
lower pitch than normal.
Yourmicrophoneandcomputerhaveasampleratemismatch.Toadjustyourcomputersam-
ple rate settings, go to the ShureFAQtopicforinformationoncorrectingsampleratemis-
match.
Loading ...
Loading ...
Loading ...