Loading ...
Loading ...
Loading ...
11
INSTALLATION PREPARATION
Before beginning the installation of your
rangehood, the method of ducting should be
considered and selected. The guide below
illustrates the various ducting options.
This rangehood cannot be operated in
recirculation mode. We recommend to duct
wherever possible.
Please follow the below tips on how to correctly
duct your rangehood:
• Always use correctly sized ducting.
• Do not reduce the size of the ducting.
• Always use solid ducting.
• Always use non-ammable ducting.
• Always duct to the outside atmosphere.
• Do not use exible ducting.
• Do not duct into the ceiling space.
Always vent to the outside atmosphere.
• Avoid sharp 90 degree bends as much
as possible. Use 45 degree bends instead
wherever possible.
• Duct to the outside atmosphere using the
shortest duct run possible.
• Use cylindrical ducting whenever possible.
Ducting Options
1. Into your ceiling cavity and then vented
through your eaves.
2. Straight up and through your tiled
or metal roof.
3. Through your wall.
7
It’s important to carefully read the following installation
instructions before beginning the installation of your oven.
Important installation safety – Always switch the power off prior to beginning the installation.
– Stainless steel is very easily damaged during installation. Wherever possible,
protect the rangehood with the cardboard box or plastic wrap during the
installation.
– For safety reasons, this Rangehood must be earthed.
– A power point must be located within 1.5m of the power cord exit from the
rangehood, and it should be always accessible to allow isolation from power
during cleaning or maintenance.
– A 150mm round ducting adapter is supplied, however all other ducting
accessories are not.
– All ducting must comply with building codes and local requirements.
– If you are re-circulating the air, rather than ducting, please ensure that the side
outlet grilles are not obstructed in any way as this will effect the effi ciency of
the rangehood.
– Ensure that the rangehood is mounted in a level position, both horizontally
and vertically. This is essential to ensure the rangehood operates correctly and
prevents grease build up at one end.
Ducting options Before beginning the installation of your rangehood, the method of ducting should be
considered and selected. The guide below illustrates the various ducting options.
Note: This rangehood can be operated in recirculation mode where required,
although Airvolution recommends to duct wherever possible.
1. Into your ceiling cavity and then vented through your eaves.
2. Straight up and through your tiled or metal roof.
INSTALLATION INSTRUCTIONS
This rangehood cannot be operated in recirculation mode,
Residentia Group recommends to duct wherever possible.
This rangehood cannot be operated in recirculation mode,
Residentia Group recommends to duct wherever possible.
7
It’s important to carefully read the following installation
instructions before beginning the installation of your oven.
Important installation safety – Always switch the power off prior to beginning the installation.
– Stainless steel is very easily damaged during installation. Wherever possible,
protect the rangehood with the cardboard box or plastic wrap during the
installation.
– For safety reasons, this Rangehood must be earthed.
– A power point must be located within 1.5m of the power cord exit from the
rangehood, and it should be always accessible to allow isolation from power
during cleaning or maintenance.
– A 150mm round ducting adapter is supplied, however all other ducting
accessories are not.
– All ducting must comply with building codes and local requirements.
– If you are re-circulating the air, rather than ducting, please ensure that the side
outlet grilles are not obstructed in any way as this will effect the effi ciency of
the rangehood.
– Ensure that the rangehood is mounted in a level position, both horizontally
and vertically. This is essential to ensure the rangehood operates correctly and
prevents grease build up at one end.
Ducting options Before beginning the installation of your rangehood, the method of ducting should be
considered and selected. The guide below illustrates the various ducting options.
Note: This rangehood can be operated in recirculation mode where required,
although Airvolution recommends to duct wherever possible.
1. Into your ceiling cavity and then vented through your eaves.
2. Straight up and through your tiled or metal roof.
INSTALLATION INSTRUCTIONS
This rangehood cannot be operated in recirculation mode,
Residentia Group recommends to duct wherever possible.
This rangehood cannot be operated in recirculation mode,
Residentia Group recommends to duct wherever possible.
7
It’s important to carefully read the following installation
instructions before beginning the installation of your oven.
Important installation safety – Always switch the power off prior to beginning the installation.
– Stainless steel is very easily damaged during installation. Wherever possible,
protect the rangehood with the cardboard box or plastic wrap during the
installation.
– For safety reasons, this Rangehood must be earthed.
– A power point must be located within 1.5m of the power cord exit from the
rangehood, and it should be always accessible to allow isolation from power
during cleaning or maintenance.
– A 150mm round ducting adapter is supplied, however all other ducting
accessories are not.
– All ducting must comply with building codes and local requirements.
– If you are re-circulating the air, rather than ducting, please ensure that the side
outlet grilles are not obstructed in any way as this will effect the effi ciency of
the rangehood.
– Ensure that the rangehood is mounted in a level position, both horizontally
and vertically. This is essential to ensure the rangehood operates correctly and
prevents grease build up at one end.
Ducting options Before beginning the installation of your rangehood, the method of ducting should be
considered and selected. The guide below illustrates the various ducting options.
Note: This rangehood can be operated in recirculation mode where required,
although Airvolution recommends to duct wherever possible.
1. Into your ceiling cavity and then vented through your eaves.
2. Straight up and through your tiled or metal roof.
INSTALLATION INSTRUCTIONS
This rangehood cannot be operated in recirculation mode,
Residentia Group recommends to duct wherever possible.
This rangehood cannot be operated in recirculation mode,
Residentia Group recommends to duct wherever possible.
Loading ...
Loading ...
Loading ...