Loading ...
Loading ...
Loading ...
7
Notes:
• Supports the connection of 2 monitors simultaneously through
DisplayPort MST mode.*
• Only one memory card slot can be used at a time.
• When connected to power through the USB-C PD charging port, 15W
is dedicated to the docking station and connected USB peripherals.
Remaining power is used to charge the connected USB-C device.
• See Optional Accessories section for suggested cables.
• When the unit is connected to the USB-C port on your computer and to a
network via Cat5e/6 cabling, a network connection will be automatically
established. If no connection is made, you can manually establish one by
going to your computer’s network settings page. For example, on a Mac,
you would navigate to the Network section found in System Preferences,
click the “Assist Me” button to get to the Network Setup Assistant, then
follow the prompts to establish a connection.
•
When plugging and unplugging the PD adapter, connected USB devices
will disconnect and then reconnect quickly. To prevent possible data loss
or corruption, avoid disconnecting the PD adapter from the AC power
supply while transferring data.
*See Multi-Monitor Requirements section for details.
1. Connect USB-C port to USB-C or Thunderbolt 3 port on your
laptop, tablet or other device.
2. Connect VGA port to VGA port on a monitor using a VGA cable.
OR
3. Connect HDMI port to HDMI port on a monitor using an HDMI
cable.
OR
4. Connect mDP port to mDP port on a monitor using a Mini
DisplayPort cable.
Installation
20-05-321-93379C-Book.indb 720-05-321-93379C-Book.indb 7 10/8/2021 1:22:38 PM10/8/2021 1:22:38 PM
Loading ...
Loading ...
Loading ...