Loading ...
Loading ...
Loading ...
29
EN
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically. Close the door, without
pressing any buttons. The cycle will start
from where it left off.
If you want to cancel and change a
programme that is already in progress,
proceed as follows:
1. Press and hold the "START/RESET"
button for at least 3 seconds.
2. The countdown appears on the display
"3 -2 -1" while the "RESET" button is
held down.
3. "RESET" will appear on the display and
beeps will sound.
4. The programme in progress will be
cancelled and the "ECO" programme,
or the programme you have decided to
use, appears on the display,
memorising it when the dishwasher is
switched on.
5. At this point it will be possible to set a
new programme using the
"PROGRAMME
SELECTION
"
keys.
While the programme is running, the display
shows the time remaining until the end of
the cycle and the name of the programme
set can be displayed by pressing any key
except for "START/RESET"
.
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues where it left off.
The end of the programme will be indicated
by 3 signals lasting 3 seconds, interspersed
with a pause of 20 seconds, after one
minute the dishwasher will switch off. At the
same time the word "END" will appear on
the display for one minute.
For models with the AUTO DOOR
option only, the door will open
automatically during the drying phase
and you must wait for the end-of-
cycle
signal before removing the dishes.
End of the programme
Programme operations.
(only for free-standing models)
WARNING:
Before starting a new programme
, you
should check that there is still
detergent in the dispenser. If
necessary, top up the detergent.
Changing a running programme
WARNING:
If you open the door during
the drying
cycle, an intermittent buzzer signal
advises you that the drying cycle has
not yet finished.
Interrupting a Programme
The "intermittent" working of the washing
pump is NOT to be consider
ed a
malfunction; it is a characteristic of
impulse washing, and therefore
should be considered a normal feature
of the programme.
Loading ...
Loading ...
Loading ...