10
IMPORTANT
SAFEGUARDS
When using any electrical appliance, some basic safety pre-
cautions should always be observed to reduce the risk of re,
electric shock, and/or injury to persons. Read all instructions
carefully before using the appliance. Specically:
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
- The appliance must not be placed im-
mediately under a xed power socket.
- Do not use the appliance outdoors.
- This heater is not intended for use in
bathrooms, laundry areas, or simi-
lar indoor locations. Never position
the appliance where it may fall into a
bathtub or come in contact with water.
- If the power cable is damaged, stop
using the product. Power cable must
be replaced by the manufacturer, an
authorised service centre or a qualied
electrician in order to eliminate all risk.
- Do not use this heater in the immedi-
ate surroundings of a bath, a shower or
a swimming pool.
- Do not insert or allow foreign objects
to enter any ventilation or exhaust
opening as this may cause an electric
shock, re, or damage the heater.
Important!
Failure to observe the warning could result in injury or dam-
age to the appliance.
- The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been giv-
en supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.Children
should be supervised to ensure that
they do not play with the appliance.
- CAUTION — Some parts of this
product can become very hot and
cause burns. Particular attention
has to be given where children
and vulnerable people are pres-
ent.
- The internal parts of the appliance can
become very hot or produce sparks
during operation. Do not use the appli-
ance in areas where gasoline, paints,
or other ammable liquids are used or
stored.
- This heater is lled with a precise
quantity of special oil. Repairs requir-
ing opening of the oil container are
only to be made by the manufacturer
or his service agent who should be
contacted if there is an oil leak; when
scrapping the heater, follow the regu-
lations concerning the disposal of oil.
- ATTENTION: To avoid the safety sys-
tem resetting accidentally, this appli-
ance must not be powered through
an external on/o device such as a
timer, or connected to a circuit which
is turned o and on regularly by the
energy supplier.
- Do not use the appliance in small
rooms when they are occupied by per-
sons that are not capable of leaving
the room, unless constant supervision
is provided.
- Always disconnect the plug from the
power outlet when the appliance is
not in use.
- Do not wrap the cord around the appli-
ance immediately after use.
- When the appliance is in use unwrap
the cord from the cord holder.
11
- The appliance must not be located im-
mediately below a xed socket-outlet.
Danger of burns!!
Failure to observe the warning could result in burns or scalds.
- WARNING: To avoid overheat-
ing, never under any circum-
stances cover the appliance
during operation as this would lead to
a dangerous rise in temperature, and
risk of re. Do not use the appliance on
soft surfaces, such as beds, where the
openings may become blocked.
- Do not run the power cord under car-
peting. Do not cover cord with throw
rugs, runners, or the like. Keep the cord
away from any passageways where it
could be tripped over.
Please note:
This symbol indicates recommendations and important infor-
mation for the user.
- Always use the appliance in an upright
position.
- Do not use this appliance with an ex-
tension cord or outlet strip. Connect
the appliance directly to a suitable
outlet.
- Make sure that the plug is fully insert-
ed into the outlet. Wall outlets may
deteriorate with time, so check the
plug periodically for signs of overheat-
ing or deformation. If the outlet has
deteriorated, stop using it and have it
repaired.
- To prevent burns, do not touch hot
surfaces with bare skin. Use the handle
when moving the appliance. Keep all
ammable materials, such as furni-
ture, pillows, bedding, paper, clothing,
and curtains at least 90 cm (3 feet)
from the front and top of the appliance
also avoid contact with the sides and
back.
- Do not use the appliance in rooms with
a oor area of less than 4m².
- Before putting the appliance away,
make sure it is completely o and un-
plugged from the mains socket. Wrap
the cable around the base. Do not store
in dusty atmospheres.
- Do not rest anything on the appliance.
- Do not use the appliance to dry laun-
dry. Do not obstruct the air intake and
outlet grilles (danger of overheating).
- Do not use the appliance near walls,
furniture, curtains, etc.
- Do not place the heater near a bed be-
cause objects such as pillows or blan-
kets can fall o the bed and be ignited
by the heater.
- Never place the power cable on top of
the heater while it is hot.
- We recommend that you not place the
heater in a draught, because strong
draughts of air may adversely aect
the equipment’s operational ecien-
cy.
- The rst time you use the appliance,
operate it of at least 2 hours with the
thermostat at maximum to eliminate
the “new” smell. A little smoke due to
the protective substances applied to
the heating element before transport
may be given o.
- Position the appliance so that the plug
and the outlet can be easily reached
even after installation.
- The appliance is tted with a safety
device which will switch o it in case
of accidental overheating. To reset,
please contact Customer Experience,
see enclosed guarantee.
12
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A display
B on-standby button
C increase button
D decrease button
E power button
F eco button
G timer button
H cord holder
I wheel
USE
"Easy wheel" system
Turn the radiator upside down on a rug or a soft surface in
order to prevent damaging the paint nish.
Fully unfold the wheels by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
Location
The heater must not be placed immediately below a power
outlet. Do not use this radiator in rooms having a surface area
of less than 43 square feet (4 sq.m.).
Power connection
- Before using the appliance check that your supply volt-
age is the same of that shown on the rating label of the
unit and that the power socket and power supply line
correspond to the load specied.
- Check also the current capacity of your fuses. CONNECT
YOUR HEATER TO EARTH PROVIDED SOCKET ONLY.
- This appliance complies with directive 2004/108/ec on
electromagnetic compatibility.
Plug in the heater, the appliance will be set in the stand-by
condition. The display will show the symbol. Keep loose
clothing or bedding, furniture and ammable material away
from the power outlet where the heater is plugged in. After
an interruption of the power supply (power failure or appli-
ance unplugged) the unit goes always to stand-by.
Heating function
To turn the appliance on, press the (B) button.
Press button (E) to set the required power level:
MIN ( ); MED ( ); MAX ( ). To select the de-
sired temperature, press button + or - (C or D). By pushing
the + or - button once, the temperature (shown on the dis-
play) will increase or decrease by 1°C (34°F). Keeping the + or
- button depressed the value will increase o decrease rapidly.
The appliance allows to set the temperature from 5°C (41°F)
to 28°C (82°F).
Anti-freeze function
Setting the temperature to 5°C (41°F) with the "-" button,
the appliance will activate the Antifreeze function.
The display will show the symbol, in this way the appli-
ance will turn on automatically, at the max power, only if
the room temperature falls below 5°C (41°F). If you wish to
go back to the Heating function, press the "+" button once.
After an interruption of the power supply (probe failure or ap-
pliance unplugged) the unit goes always to stand-by.
Eco function
When this function is active the appliance automatically sets
the most appropriate power level to guarantee optimum
comfort while reducing energy consumption.
To activate this function press the "ECO" (F) button. The dis-
play will show symbol. If the selected temperature is
much higher than the actual room temperature, the appli-
ance will start automatically and rapidly to heat the room.
The appliance will automatically select the most convenient
power level (MAX-MED-MIN-OFF).
If MAX power level has been selected using the but-
ton, the appliance will cycle between: MAX-MED-MIN-OFF.
If MED power level has been selected, the appliance will cycle
between: MED-MIN-OFF.
If MIN power level has been selected, the appliance will cycle
between: MIN-OFF.
Fig. 1
13
Working indicator
The symbol indicates the heating status by means of its
colors.
RED: the unit is heating at the maximum power.
ORANGE: the unit is heating at the medium power.
GREEN: the unit is heating at the minimum power.
absent: the unit is not heating.
Key lock
In order to avoid accidental operation, you can lock the key-
board using the keylock function. To activate this function
during on mode, press buttons + and - together for at least
3 seconds. The display shows the symbol and a double
acoustic signal will be emitted. To disactivate the function
proceed in the same way.
Timer function
This function can be activated in two dierent ways.
Delayed start: With the appliance in standby mode, press
the timer button (G) . The hours left before the appliance
comes on is displayed together the symbol and "h" sym-
bol ashing. Change the hours using the + and - buttons,
then wait a few seconds for the program to be stored.
The display will return to o and the symbols remains on.
When the programmed time has elapsed, the appliance will
come on with the previous settings.
Delayed stop: with the appliance on, press the timer but-
ton . The hours left before the appliance goes to stand-
by mode, the power level and in case the function selected
are displayed together with the symbol and "h" symbol
ashing. Change the hours using the + and - buttons, then
wait a few seconds for the program to be stored.
The current settings and symbol are displayed. At the end
of the set time the appliance switches to standby mode au-
tomatically. To go back to operating without the timer, press
the timer button twice. The timer symbol disappears
from the display.
Please note: the time is settable from 0.5 to 24 hours.
Change of the temperature scale
The display can show the temperature in both °F and °C.
To select the desired temperature scale, when the unit is in
standby position, press and hold the "+" and "ECO" keys for
at least 10 seconds, then release.
The change of scale will be indicated by two short beeps.
Brightness of the display
The appliance allows two dierent brightness settings for the
display. The highest is active when any key button is pressed.
After a few seconds of key board inactivity, the brightness will
decrease to the operating brightness level. This lower level
can be adjusted in this way:
- with the appliance in on mode after pressing for 5 sec-
onds the ECO button the display will show:
- With the + and - button is possible to select the desired
brightness (three brightness levels available).
- After 5 seconds without to press any button, the bright-
ness level will be memorized and the operating condi-
tions will be the same ones previously set.
Alarms
The appliance has a diagnostic system that makes it possible
to signal malfunctions.
In case of problems, the display will show an alarm message:
- (Probe Failure) blinking
With this alarm the appliance does not operate. Contact
the De'Longhi Customer Service.
- (High temperature)
When the product’s internal temperature is too high,
the heating power will progressively and automati-
cally be reduced. The display shows for two seconds,
blinking. To remove the cause of this alarm check that
the unit is not covered and let the appliance cool down.
14
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The display doesn't work Be sure it is plugged in and that the
electrical outlet is working
The safety device may have switched o
the appliance
Plug into the power outlet
Remove the obstruction and let the
appliance cool down. If the appliance
doesn't work please contact the
De'Longhi
Customer Service
The appliance doesn't warm up The temperature may be set too low
Set the temperature to a higher value
The display shows: blinking
It indicates that the room temperature
sensor has failed
Please contact the De'Longhi Customer
Service
The display shows:
(High temperature) blinking
The unit has reached a too high internal
temperature
Check that the unit is not covered
and let
the appliance cool down
. When the product
internal temperature decreases, the alarm
will disappear.
If the appliance doesn't work please contact
the
De'Longhi Customer Service
SAFETY DEVICE
A safety device switches the heater o in the event of over-
heating.
To restart the heater, call the De'Longhi Customer Service.
MAINTENANCE
Always remove the plug from the power outlet and allow the
radiator to cool. Wipe radiator with a soft damp cloth, do not
use detergents and abrasives. Should the radiator not be in
use over a certain length of time, wind the cord around the
cord holder and store it in a dry place. This appliance has been
built to give many years of trouble free service.
In case of malfunction or doubt, do not try to repair the heat-
er by yourself: this may result in a re hazard or electric shock.
Call the De'Longhi Customer Service (see attached list of
De'Longhi Customer Service).
