Loading ...
Loading ...
Loading ...
Q2
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
l
Appropriate Signal Reception Location
Did you avoid touching the watch while the
receive operation was in progress?
Minimize movement of the watch and do
not perform any watch operation while a
receive operation is in progress.
Is there an alarm configured to sound
during the same period that the signal
receive operation is performed?
Receive stops if an alarm operation starts
while it is being performed. Disable the
alarm.
l
Turning Off an Alarm
Is the signal transmitter in your area
transmitting a signal?
The transmitter of the time calibration may
not be transmitting a signal.
Try again later.
Q3
Signal reception should have been
successful, but the watch’s time and/
or day is wrong.
Is the indicated time off by one hour or by
30 minutes?
The watch may be using the wrong time
offset. Correctly specify the time zone
where you are using the watch.
l
Selecting Your Home City’s Time Zone
Is the indicated hour and/or minute wrong?
The hour hand and/or minute hand may
be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to auto adjust
hour and minute hand alignment.
l
Adjusting Hand and Day Indicator
Alignment
Is the indicated day of the week wrong?
The day of the week hand (mode hand)
may be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to adjust mode
hand alignment.
l
Adjusting Hand and Day Indicator
Alignment
Is the indicated Dual Time and/or alarm
time wrong?
The Dual Time and/or alarm time hands
(small hour hand, small minute hand) may
be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to adjust small
hour hand and small minute hand
alignment.
l
Adjusting Hand and Day Indicator
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
l
Using Watch Operations to Adjust the
Time Setting
I can’t pair the watch with a
phone.
Q1
I’ve never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install CASIO WATCHES on your
phone?
CASIO WATCHES needs to be installed
on your phone in order to connect with the
watch.
l
A
Install the required app on your
phone.
Are your phone’s Bluetooth settings
configured correctly?
Configure the phone’s Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
●
“Settings”
n
“Bluetooth”
n
On
●
“Settings”
n
“Privacy”
n
“Bluetooth
Sharing”
n
“CASIO WATCHES”
n
On
Android Users
●
Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCHES. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: “Menu”
n
“Settings”
n
“Bluetooth”
n
“Menu”
n
“BT Smart settings”
n
“Disable”.
Operation Guide 5625
20
Loading ...
Loading ...
Loading ...