Loading ...
Loading ...
Loading ...
11
Replacing the bulb
1.
Switch the unit off and unplug the appliance.
2.
Remove the lamp cover by unscrewing the 2
screws. 3.Unscrew the bulbs.
4.Replace with the same type and rated bulb/lamp.
Troubleshooting
Fault
Cause
Solution
The lights on,
but the fan does
not work
The fan blade is jammed.
Switch off the unit and
repaired by qualified
service personnel only.
The motor is damaged.
The lights and
fan do not work
A blown fuse
Replace the fuse
The power cord is loose.
Plug in to the power supply again.
Serious vibration
of the unit
The fan blade is damaged.
Switch off the unit and
repaired by qualified
service personnel only.
The fan motor is not fixed
tightly.
Switch off the unit and
repaired by qualified
service personnel only.
The unit is not hung
correctly on the bracket.
Take down the unit and check whether
the bracket is in the correct location.
The extraction
performance is
not good
The filter requires cleaning
Clean the grease filter as directed in
the ‘Care and maintenance’ section.
Replace the charcoal filter (if in
recirculation mode)
Loading ...