Loading ...
Loading ...
Loading ...
5
• Turn the power selector knob to the Max position to select
maximum power.
• Turn the power selector knob to the Max position to select
maximum power with the fan (the MAX + FAN indicator light
comes on).
• To turn the appliance o completely: turn the power selector
to the "0" position and the thermostat to the " " position,
then unplug from the mains.
Adjusting the thermostat
When the room has reached the required temperature, turn the
thermostat dial slowly anticlockwise until you hear a click and no
further. The thermostat will automatically regulate the temperature
set and keep it constant. In spring or autumn or on mild days, you
can save energy by using minimum power.
Frost prevention mode
With the thermostat dial in the position and one of the power
levels selected, the appliance maintains room temperature at about
5°C, preventing freezing with minimal energy consumption.
Models with ventilation
The appliance has 2 fans for faster more even heating. To start this
function, turn the power selector to Max .
Models with 24 hour timer
When the appliance is plugged to the mains the timer is always
in turning movement, in order to stay synchronized with the local
time.
To operate the appliance without the timer, place the timer slider in
the position. To operate the appliance at set times, position
the slider in the position and proceed as follows:
• Check the time on your clock or watch. If it is 10.00 for example,
turn the numbered programmer disk until the number 10
coincides with the pointer marked on the programmer.
• Set the periods of time
during which you want
the appliance to operate
by pushing the teeth
outwards (see gure).
Each tooth corresponds
to a period of 30 min. At
the end of this procedure,
sectors corresponding to
the operating periods can be seen.
• In this way, the appliance will function automatically each day
at the times set. (Important: the appliance must always be
plugged into the socket)
• To modify programming, return the teeth to the initial position
and set the new operating periods.
• To turn the appliance o, turn the power selector to the "0"
position.
MAINTENANCE
Before carrying out any maintenance, unplug the heater from the
mains and wait for it to cool o completely. This heater requires no
particular maintenance. It is sucient to remove the dust with a
soft, dry cloth. Never use abrasive powders or solvents. If necessary
remove concentrated areas of dirt with a vacuum cleaner.
TECHNICAL CHARACTERISTICS
Power supply See rating label
Absorbed power “
PROBLEM CAUSE SOLUTION
The appliance doesn’t work Be sure it is plugged in and that the electrical out-
let is working.
Check for any obstruction.
The power selector is in the ”0” position.
The thermostat may be set too low.
Setting the timer
Plug into the outlet.
Remove the obstruction, unplug the heater
and let the appliance cool down. If the appli-
ance doesn’t work please contact the nearest
service center.
Turn the
power
selector to the position MIN,
MED, MAX, MAX
.
Turn the thermostat clockwise to a higher
setting until the heater restarts.
Make sure the timer is correctly set to local
time and check the position of the teeth.
TROUBLESHOOTING