Loading ...
CERAMIC WALL HEATER INSTALLATION REQUIREMENTS
INSTALLATION
1. Measure the distance between the mounting holes on the back of the appliance and then mark the wall at the measured distance. Ensure that the marks
you make are level.
2. Drill holes to the same diameter as the wall plugs.
3. Place the wall plugs into the hole in the wall and then fix two screws into the wall plugs.
4. Keep the heads of the screws out approximately 10mm.
5. Hang the heater on the screws and slide the heater across to the right and then down, locking the heater to the screws in the wall.
6. Remote Placement – Remote and Remote Holder Toggle (if included) can be placed either to the side of the product or on opposite walls within the room.
Toggle extends approx. 300mm.
Please refer to your user manual for operating instructions, further information or trouble shooting before you call the Customer Service
number listed within the user manual.
Min 300mm
Clearance from bottom of
heater to any obstructions
Min 300mm
Min 1800mm
Clearance above floor
Min 1800mm
Min 300mm
Clearance to ceiling
Side View Front View
Power Socket positioning to side of heater
• Connection Options: Plug & Switch or
Hard-wired & Switch
Remote placement
• On wall under and to side of heater or
on opposing walls (if toggle used).
Remote Range
• On same wall – 2m from side
when attached to toggle
• Directly in Front – 9m
• 45
o
Angle – 5m
• 30
o
Angle – 4m
Min 1000mm clearance from air
outlet to any flammable material
including textiles or curtains
Min 200mm
from side to
wall or object
Min 1000mm clearance from air
outlet to any flammable material
including textiles or curtains
Min 200mm
from side to
wall or object