Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is intended for vacuuming dust in domestic use.
1.2 OVERVIEW
See figure 1-9
1
Collection tank Assembly
2
Filter
3
Hose
4
Crevice Tool
5
Utility Nozzle
6
Latch
7
Top cover
8
Filter cage
9
Collection tank
10
Tab
11
Vacuum port
12
Battery pack
13
ON/OFF Button
14
Groove
1.3 PACKING LIST
See figure 1
1
Collection tank Assembly
2
Filter
3
Hose
4
Crevice Tool
5
Utility Nozzle
2 SAFETY
WARNING
Make sure that you follow all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
• Replace the battery pack or the charger immediately if the
battery pack or charger cord is damaged.
• Exam that the machine is in the OFF status before you
install or remove the battery pack.
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
3.2 INSTALL THE FILTER
See figure 2-4
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
1. Lift the latch on both sides of the top cover assembly.
2. Align the filter with the filter cage.
3. Slide the filter on the filter cage.
4. Rotate and twist the filter into place.
3.3 REMOVE THE FILTER
1.
Lift the latch on both sides of the top cover assembly.
2. Remove the collection tank.
3. Turn the filter counterclockwise.
4. Slide the filter off.
3.4
INSERT THE HOSE
See figure 5-6
1. Align either of the grooves in the tube with the tabs on
the hose.
2. Insert the locking end of the hose into the vacuum port
and turn clockwise to lock into place.
3. Insert your desired accessory onto the end of the hose
securely.
4
English
EN
Loading ...
Loading ...
Loading ...