Loading ...
Loading ...
Loading ...
8
function gets exited. Cooling down the freezer temperature in a rapid manner is good
for the prevention against food nutrition loss and the preservation of freshness.
When the fast-freezing function is active, the freezer temperature is subject to no
change.
2) To enter “Fast Freezing”.
Press the “Function” key until the icon of “Fast Freezing” starts flickering, and then
press the “OK” key within 5 seconds to validate the setting, with the icon of “Fast
Freezing” normally On.
3) To exit “Fast Freezing”.
After a cumulative running period of 26 hours, the fast-freezing function will exit
automatically.
When the fast-freezing function is active, press the “Function” key until the icon of
“Fast Freezing” gets flickering, and then press the “OK”key within 5 second to validate
the setting, with the icon of “Fast Freezing” extinguished and the fast-freezing
function disabled.
When the ECO function is enabled, the fast-freezing function will be disabled
automatically.
Door open alarm
If any door is opened for more than 3 minutes, buzzer alarm will be continuously
beeping. It can be stopped by pressing any key button, but will be restored after 3
minutes if the door keeps opening.
The alarm will stop when the doors are closed properly.
Power cut memory
In the case of power failure, the refrigerator will maintain the previous setting when the
power supply is restored.
Power-on delay
In order to protect the compressor from being damaged in the case of short-time power
failure (i.e., less than 5 minutes), the compressor will not be started immediately after it
is powered on. But it will restart after power comes back on for more than 5 minutes.
Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher
than -10℃, digits of the freezer zone get flickering on the display. The freezer
temperature can be displayed when any key is pressed, and the normal display will be
restored when any key is pressed again or after 10s.
Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the display panel, it indicates fault with
the refrigerator. Please contact CHIQ service centre for a service call.
Loading ...
Loading ...
Loading ...