Ancona AN-1503 User Manual & Installation Instructions

Loading ...

— 13 —

STEP 12

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

Fig #1

STEP 10

Installing the damper

• Fix the damper on the top vent of hood with 4 screws. (See Figure # 3)

• If ventilation system is equipped with an external air duct with a

different diameter, apply a reduction tting. However, for maximum

performance and safety, a 6” round ducting is recommended.

Fig #3

STEP 11

Mount Range Hood Onto Wall

• Hang the range hood on the hooks of the lower mounting bracket. (See Figure # 4)

• Screw the range hood to the wall. (See Figure # 5)

CAUTION - Make certain the range hood is secure before releasing!

Fig #5Fig #4

Loading ...

Ancona AN-1503 GCD430 30 in. Convertible Glass Canopy 400 CFM Ducted Wall Mount Range Hood