Ancona AN-1503 User Manual & Installation Instructions

Loading ...

— 12 —

Installation

STEP 9

Installing the glass

• Place the glass piece over the range hood and tighten

using the 4 designated screws. (See Figure # 2)

190

115

Fig #1

Flush to the ceiling

STEP 7

Installing the hood mounting bracket

• Use a pencil to mark on the wall the desired placement of

the range hood mounting screws.

• The range hood will be installed on top of this bracket (See

Figure # 1).

• Using references in Height & Clearance on Page 10 and

Measurements and Diagrams on Page 7, drill 3 holes that

will be used to x the lower mounting bracket.

STEP 8

Installing the upper chimney bracket

• Drill2holesaccordingtothesizeoftheuppermountingbracket.Theuppermountingbracketshouldbepositioned

ushwiththetopoftheoutsidechimney(SeeFigure#1)

• Screw upper and hood mounting brackets in tightly.

Fig #2

STEP 6

Preparations:

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

• Determine and mark the center line on the ceiling or wall where the range hood will be installed.

• Make sure there is proper clearance within the ceiling or wall for exhaust vent.

• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

• Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt.

• Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE

Loading ...

Ancona AN-1503 GCD430 30 in. Convertible Glass Canopy 400 CFM Ducted Wall Mount Range Hood