Loading ...
• 1 x Charging Station with attached charging plug
• 1 x Plate
• 1 x Holder
• 1 x Hook
• 1 x Allen Wrench
• 4 x Long Screws
• 10 x Short Screws
• 10 x Wall Plugs
• 1 x Reference Paper
Need help? Send us an email at: [email protected] Page 2
Package Includes
Safety Information
• Failure to follow the instructions may result in danger.
• Do not disassemble the charging station while its operating.
• Install the charging station away from pyrotechnics, dusty or corrosive
places.
• The charging station produces a high voltage output. You must pay
attention to personal safety when using it.
• If a malfunction occurs, it may cause an electric shock or even death.
• Regularly check whether the charging station has visible damage. An electric
shock may occur when operating a damaged charging station.
• If a ground fault occurs, it must be assumed that the cable carries voltage.
Please confirm that there’s no high-voltage power in the system before
inspecting the charging station.
• Before powering the charging station, please confirm that the device is
properly grounded to avoid unnecessary accidents.
• Do not modify, retrofit, or change any part by yourself under any
circumstances.
• To ensure the service life and stable operation of the charging station, the
operating environment should be kept as clean as possible with a relatively
stable temperature and humidity. The charging station must not be used in
a flammable environment.
• Be sure to confirm that the input voltage, frequency, circuit breakers and
other conditions of the charging station meet the specifications before it is
powered on.
Charging Station
with attached
charging plug
Plate
Holder Hook Allen Wrench
Long Screws
Short Screws
Wall Plugs Reference Paper
Loading ...
Loading ...
Loading ...