1
ASSEMBLY GUIDE
GMJ12
Launch & Loop Raceway!
2
BEFORE YOU BEGIN
Two AA (R6) batteries are included. Batteries
included are for demonstration purposes only.
Battery replacement is required. For longer life,
use alkaline batteries.
Adult assembly is required (because we need to fit
this toy in the box). You’ll need a Phillips screwdriver
(not included) for assembly and battery installation.
Set aside about 45 minutes for assembly.
Keep these instructions for future reference as they
contain important information.
Clean with a damp cloth.
Do not immerse.
Track pieces are numbered! Look for the numbers on
the underside of the track when assembling.
Some of the track piece are designed to easily break
away, just in case your little one decides to climb on the
product. You can easily reassemble these track pieces.
45
x2
1,5V
AA
(LR6)
3
PARTS
4
5
M3,5 x 1,6 mm
x16
M3 5 1 6
CAUTION
This package contains small parts.
For adult assembly only.
6
1
3
5
7
9
2
4
6
8
10
Each track piece is numbered. Look for numbers on the
underside of all of the tracks!
7
ASSEMBLY
1.
The taller risers are
designed to fit the
sockets in the base one
way. If a riser doesn’t
seem to fit, turn it around
or try assembling to the
other socket.
Use your smart device
to scan the code. No
app required!
In camera mode, focus
on the code. Then tap
the pop-up to watch
how to assemble the toy.
Or visit:
fisher-price.com/
assembly/GMJ12
8
2.
3.
x2
The shorter risers are
designed to fit the
sockets in the bases one
way. If a riser doesn’t
seem to fit, turn it around
or try assembling to the
other base.
9
4.
5.
10
6.
7.
x4
Choose the panel that
has a hexagon and star
shape on it. Match the
hexagon on the panel
to the hexagon on
the riser.
11
8.
9.
x4
Match the star on the
panel to the star on
the riser.
12
10.
11.
Match the triangle on
the panel to the triangle
on the riser.
The remaining panel
should have a heart and
triangle shape on it.
Match the heart on the
panel to the heart on
the riser.
13
12.
13.
Once assembled,
the center tower
assembly should look
like this when looking
at the top of it.
x4
14
14.
15.
x2
15
16.
17.
16
1
Track pieces are
numbered! Look for
the numbers on the
underside of the track
when assembling.
18.
19.
Tra
c
num
t
he
und
whe
2
17
3
20.
21.
18
22.
23.
4
19
5
24.
25.
6
6
20
26.
27.
7
Hint: Assembling the
orange launcher may take
a lot of force. To make it
easier, support the green
track and the turquoise
launcher with your hand
while you push down to
assemble the launcher.
Support here
Support here
21
28.
29.
8
For this assembly step,
use the shorter post.
22
9
30.
31.
Turn blue track 9 to fit it
to blue track 8.
23
10
Hint: After
inserting the taller
post into the
shorter post, you
may need to turn
it to “snap” it to
the track above.
32.
33.
24
Locate the battery door on the
top of the upper launch pad.
Loosen the screw in the battery
door and remove the door.
Insert two AA (LR6)
alkaline batteries.
Replace the battery door
and tighten the screw.
Do not over-tighten.
If this toy begins to operate
erratically, you may need to reset
the electronics. Slide the power
switch off and back on.
When sounds or lights become
faint or stop, it’s time for an adult
to change the batteries.
Slide to turn
power ON or
OFF when
finished playing.
INSTALL BATTERIES
25
25
CRAZY RACING ACTION!
Lower
Lower
the gate
the gate
Press the
Press the
red lever
red lever
Place a wheelie
Place a wheelie
on the orange
on the orange
launcher and give
launcher and give
it a little push
it a little push
Lift the
Lift the
gate
gate
Press the
Press the
red lever
red lever
Press the
Press the
red lever
red lever
Flip up the yellow
Flip up the yellow
slide cover
slide cover
Place a wheelie at the
Place a wheelie at the
top of launcher
top of launcher
Place the wheelies at the
Place the wheelies at the
top of the launchers
top of the launchers
3
2
2
1
4
4
3
3
1
26
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et (2) il doit pouvoir tolérer tout
brouillage radioélectrique reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.However, there is no guarantee that
interference will not occur in a particular installation.If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause
a chemical burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable.
• Insert batteries as indicated inside the battery compartment (+/-).
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
Protect the environment by not disposing of this product or any
batteries with household waste. This symbol indicates that this product
shall not be treated as household waste. Check your local authority for
recycling advice and facilities.
27
UNITED STATES
Fisher-Price, Inc., 636 Girard Avenue, East Aurora,
NY 14052. Consumer Services: 1-800-432-5437.
CANADA
Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2 Consumer Services/Service à la clientèle :
1-800-432-5437. www.service.mattel.com.
GREAT BRITAIN
Mattel U.K. Limited, The Porter Building, 1 Brunel Way, Slough SL1 1FQ, UK.
www.service.mattel.com/uk.
NEDERLAND
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
AUSTRALIA
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND
16-18 William Pickering Drive, Albany 1331, Auckland.
SOUTH AFRICA
Mattel South Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard,
Johannesburg 2196.
28
©2020 Ma el. GMJ12-0970-G1
PRINTED IN MEXICO 1102367840-DOM
