NEC P60XC10 60" Residential Plasma Display User Manual

PlasmaSync 42XC10

PlasmaSync 50XC10

PlasmaSync 60XC10

English

User’s Manual

Package Contents

Plasma Monitor

Remote control and AA Batteries

Power cord

Users Manual (CD-ROM)

Start Up Guide (Paper / CD-ROM)

Main Power Switch cover and screw

Cable clamps

•

Important Safety Instructions ..............................................................................................................English-1

Important Information ...........................................................................................................................English-2

Safety Precautions and Maintenance ...................................................................................................English-3

Recommended Use ....................................................................................................................................English-4

Installation

Optional Stands/Mounts ..........................................................................................................English-6

Mounting Location ....................................................................................................................English-6

Mounting on Ceiling ..................................................................................................................English-7

Maintenance, Orientation, Cable Management ..................................................................English-7

Using the Remote ......................................................................................................................English-8

Part Names and Functions

Control Panel ..............................................................................................................................English-9

Terminal Panel ............................................................................................................................English-10

Remote Control ..........................................................................................................................English-11

Power, Display, Digital Zoom, Pointer, Main Power Switch Cover .....................................English-12

Remote Control ID .....................................................................................................................English-13

On-Screen Display (OSD)

Using the OSD .............................................................................................................................English-14

OSD ................................................................................................................................................English-15

Operation

Picture Size Using Video Signals ............................................................................................English-18

Picture Size Using Computer Signals ....................................................................................English-19

Split Screen Mode .....................................................................................................................English-20

Picture-in-Picture Mode .........................................................................................................English-21

RS-232C .......................................................................................................................................................English-23

Troubleshooting.........................................................................................................................................English-27

Speciﬁ cations

42XC10..........................................................................................................................................English-28

50XC10 .........................................................................................................................................English-29

60XC10 .........................................................................................................................................English-30

Supported Resolutions

42XC10..........................................................................................................................................English-31

50XC10 .........................................................................................................................................English-33

60XC10 .........................................................................................................................................English-35

Pin Assignment ..........................................................................................................................................English-37

Table of Contents

English

English-1

Read Before Operating Equipment.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in

accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampli ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and third grounding prong  e wide

blade or third prong are provided for your safety. If the

provided plug does not  t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories speci ed by the

manufacturer

12. Use only with the cart, stand, tripod, bracket, or

table speci ed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart or apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time

14. Refer all servicing to quali ed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as when the power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped

Additional Safety Information

15.  is product may contain lead. Disposal of these

materials may be regulated due to environmental

considerations.

For disposal or recycling information, please contact

your local authorities or the Electronic Industries

Alliance: www.eiae org.

16. Damage Requiring Service - e appliance should be

serviced by quali ed service personnel when:

A.  e power supply cord or the plug has been damaged;

B. Objects have fallen, or liquid has been spilled into

the appliance;

C.  e appliance has been exposed to rain;

D.  e appliance does not appear to operate normally or

exhibits a marked change in performance;

E.  e appliance has been dropped, or the enclosure

damaged.

17. Tilt/Stability - All monitors must comply with

recommended international global safety standards for

tilt and stability properties of its cabinet design.

Do not compromise these design standards by applying

excessive pull force to the front, or top, of the cabinet

which could ultimately overturn the product.

Also, do not endanger yourself, or children, by placing

electronic equipment/toys on the top of the cabinet.

Such items could unsuspectingly fall from the top of the

set and cause product damage and/or personal injury.

18. Wall/Ceiling Mounting -  e appliance should be

mounted to a wall/ceiling only as recommended by the

manufacturer.

19. Power Lines - An outdoor antenna should be located

away from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system

is grounded so as to provide some protection against

voltage surges and built up static charges.

Section 810 of the National Electric code. ANSI/NFPA

No.70-1984, provides information with respect to

proper grounding of the mats and supporting structure,

grounding of the lead-in wire to an antenna-discharge

unit, size of grounding connectors, location of antenna

discharge unit, connection to grounding electrodes and

requirements for the grounding electrode.

21. Objects and Liquid Entry - Care should be taken so that

objects do not fall and liquids are not spilled into the

enclosure through openings.

Apparatus shall not be exposed to dripping or splashing

and no objects  lled with liquids, such as vases, shall be

placed on apparatus

WA R N I N G

To reduce the risk of  re or electric shock, do not expose

this apparatus to rain or moisture.

Important Safety Instructions

English-2

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS

UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS

CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL

SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD

FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

 is symbol warns user that uninsulated voltage within the unit may have su cient magnitude to cause electric shock.

 erefore, it is dangerous to make any kind of contact with any part inside this unit.

 is symbol alerts the user that important literature concerning the operation and maintenance of this unit has been

included.  erefore, it should be read carefully in order to avoid any problems.

Important Information

Canadian Department of

Communications Compliance Statement

DOC:  is Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

FCC Information

1. Use the attached speci ed cables with the P426Y3(P42XC10),

P506Y4(P50XC10) or P606Y5(P60XC10) color monitor so as not to

interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to

ensure FCC compliance.

(2) Please use shielded video signal cable,

15-pin mini D-SUB to 15-pin mini D-SUB

with ferrite cores on both ends (not included).

2.  is equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.  ese

limits are designed to provide reasonable protection against harmful

interference in a residential installation.  is equipment generates, uses,

and can radiate radio frequency energy, and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

di erent from that to which the receiver is connected.

Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/

television technician for additional suggestions.  e user may  nd the

following booklet, prepared by the Federal Communications Commission,

helpful: “How to Identify and Resolve Radio-TV Interference Problems.”  is

booklet is available from the U.S. Government Printing O ce, Washington,

D.C., 20402, Stock No. 004-000-00345-4.

WARN ING

 is product equipped with a three-wire grounding (earthed) plug - a plug

that has a third (grounding) pin.  is plug only  ts a grounding-type power

outlet. If you are unable to insert the plug into an outlet, contact a licensed

electrician to replace the outlet with a properly grounded one. Do not defeat

the safety purpose of the grounding plug.

•

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not

supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC

voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug Type North America

European

Continental

U.K. Chinese Japanese

Plug Shape

Country

Voltage

U.S.A./Canada U.K. China JapanEU (except U.K.)

120* 230 220 100230

*When operating the PlasmaSync monitor with its AC 125-240V power supply, use a power supply cord that matches the power

supply voltage of the AC power outlet being used.

English

English-3

Safety Precautions

and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE MONITOR:

 e plasma display's panel is made up of  ne picture

elements (cells), of which more than 99.99 percent are active

cells. Some cells may not produce light or remain constantly

lit. For safe operation and to avoid damaging the unit, read

carefully and observe the following instructions.

DO NOT OPEN THE MONITOR.  ere are no user-

serviceable parts inside and opening or removing covers

may expose you to dangerous shock hazards or other

risks.  e manufacturer is not liable for any bodily harm

or damage caused if unquali ed persons attempt service

or open the back cover. Refer all servicing to quali ed

service personnel.

Do not spill any liquids into the cabinet or use your

monitor near water.

Do not insert objects of any kind into the cabinet slots,

as they may touch dangerous voltage points, which can

be harmful or fatal or may cause electric shock,  re or

equipment failure.

Do not bend, crimp or otherwise damage the power cord.

Do not place any heavy objects on the power cord.

Damage to the cord may cause shock or  re.

Do not place this product on a sloping or unstable cart,

stand or table, as the monitor may fall, causing serious

damage to the monitor.

Do not use in a moving vehicle, as the unit could drop or

topple over and cause injuries.

 e power cable connector is the primary means of

detaching the system from the power supply.  e

monitor should be installed close to a power outlet that

is easily accessible.

 is equipment shall be connected to a MAIN outlet

with a protective earth-ground connection. Do not place

any objects onto the monitor and do not use the monitor

outdoors.

Do not use this unit’s polarized plug with an extension

cord or with outlets unless the prongs can be inserted

fully.

 e power supply cord you use must have been approved

by and comply with the safety standards of your

country. (Type H05VV-F 3G 1mm

should be used in

Europe)

In UK, use a BS-approved power cord with molded plug

having a black (13A) fuse installed for use with this

monitor.

Use only with 100 V to 240 V 50 Hz/60 Hz AC power

supply. Continued operation at line voltages greater than

100 V to 240 V AC will shorten the life of the unit, and

might even cause a  re hazard.

•

Unplug the power cord during electrical storms or when

the unit will not be in use for a long period.

Do not use monitor in high temperature, humid, dusty,

or oily areas.

Do not cover vent on monitor.

Clean plasma ventilation areas using a vacuum cleaner

with a so brush nozzle attachment.

To ensure proper ventilation, cleaning the ventilation

areas must be carried out monthly. More frequent

cleaning may be necessary depending on the

environment in which the plasma monitor is installed.

Allow adequate ventilation around the monitor so that

heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other

heat sources. Do not put anything on top of monitor.

Handle with care when transporting. Save packaging for

transporting.

As is the case with any phosphor-based display (like a

CRT monitor, for example) light output will gradually

decrease over the life of a Plasma Display Panel.

To avoid sulfurization it is strongly recommended not to

place the unit in a dressing room in a public bath or hot

spring bath.

CAUTION

Immediately unplug your monitor from the wall outlet and

refer servicing to quali ed service personnel under the

following conditions:

When the power supply cord or plug is damaged.

If liquid has been spilled on, or objects have fallen into

the monitor.

If the monitor has been exposed to rain or water.

If the monitor has been dropped or the cabinet

damaged.

If the monitor does not operate normally by following

operating instructions.

•

Safety Precautions and Maintenance

English-4

Recommended Use

CAUTION

CORRECT PLACEMENT AND ADJUSTMENT OF

THE MONITOR CAN REDUCE EYE, SHOULDER AND

NECK FATIGUE. CHECK THE FOLLOWING WHEN

POSITIONING THE MONITOR:

For optimum performance, allow 20 minutes for warm-

up.

Rest your eyes periodically by focusing on an object at

least 5 feet away. Blink o en.

Position the monitor at a 90 degree angle to windows

and other light sources to minimize glare and

re ections.

Clean the monitor surface with a lint-free, nonabrasive

cloth. Avoid using any cleaning solution or glass

cleaner.

Adjust the monitor’s brightness and contrast controls to

enhance readability.

Get regular eye checkups.

Ergonomics

To realize the maximum ergonomic bene ts, we recommend

the following:

Use the preset Size and Position controls with standard

signals.

Use the preset Color Setting.

Do not use primary color blue on a dark background, as

it is di cult to see and may produce eye fatigue due to

insu cient contrast.

 is equipment is not for use at video display work

station according to Bildscharb V.

For more detailed information on setting up a healthy work

environment, refer to the following document:

American National Standard for Human Factors

Engineering of Visual Display Terminal Workstations

ANSI-HFS Standard No. 100-1988

Published by:

 e Human Factors and Ergonomics Society

P.O. Box 1369, Santa Monica, California 90406.

•

Cleaning the Panel

When the panel becomes dusty or dirty, wipe gently

with so cloth.

Do not rub the panel with coarse material.

Do not apply pressure to the surface.

Do not use OA cleaner. OA cleaner will cause

deterioration or discolor the surface.

Cleaning the Cabinet

Unplug the power supply.

Gently wipe the cabinet with a so cloth.

To clean the cabinet, dampen the cloth with a neutral

detergent and water, wipe the cabinet and follow with a

dry cloth.

NOTE:  e surface of the cabinet is composed of many

types of plastic.

DO NOT clean with benzene thinner, alkaline

detergent, alcoholic system detergent, glass cleaner,

wax, polish cleaner, soap powder, or insecticide.

Rubber or vinyl should not be in contact with

the cabinet for an extended period of time.  ese

types of  uids and materials can cause the paint to

deteriorate, crack or peel.

CLEANING THE VENT HOLES

Clean plasma ventilation areas using a vacuum cleaner

with a so brush nozzle attachment.

To ensure proper ventilation, cleaning the ventilation

areas must be carried out monthly. More frequent

cleaning may be necessary depending on the

environment in which the plasma monitor is installed.

•

English

English-5

Recommended Use - continued

To avoid or minimize image

retention:

Like all phosphor-based display devices and all other gas

plasma displays, plasma monitors can be susceptible to image

retention under certain circumstances. Certain operating

conditions, such as the continuous display of a static

image over a prolonged period of time, can result in image

retention if proper precautions are not taken. To protect

your investment in this plasma monitor, please adhere to the

following guidelines and recommendations for minimizing

the occurrence of image retention:

Always enable and use your computer’s screen saver

function during use with a computer input source.

Display a moving image whenever possible.

Change the position of the menu display from time to

time.

Always power down the monitor when you are  nished

using it.

To reduce the likelihood of

image retention from long-term

use:

Lower the Brightness and Contrast levels as much as

possible without impairing image readability.

Display an image with many colors and color gradations

(i.e. photographic or photo-realistic images).

Create image content with minimal contrast between

light and dark areas. Use complementary or pastel colors

whenever possible.

Avoid displaying images with few colors and distinct,

sharply de ned borders between colors.

Plasma monitor driving sound

 e panel of the Plasma monitor is composed of

extremely  ne pixels and these pixels emit light

according to received video signals.  is principle may

cause you to hear a buzz or electrical hum coming from

the Plasma monitor. Also note that the rotation speed

of the cooling fan motor increases when the ambient

temperature of the Plasma monitor becomes high. You

may hear the sound of the motor at that time.

NOTE:  e following items are not covered by the

warranty.

• Image retention

• Panel generated sound. Examples: Fan motor

and electrical noises circuit humming /glass panel

buzzing.

•

OPERATING ENVIRONMENT

Operating environment temperature and humidity: 0 °C to

+40 °C (+32 °F to +104 °F); less than 80%RH (cooling vents

not blocked) Do not install this unit in a poorly ventilated

area, or in locations exposed to high humidity or direct

sunlight (or strong arti cial light)

WARNING

Not for use in a computer room as de ned in the Standard

for the Protection of Electronic Computer/Data Processing

Equipment ANSI/NFPA 75.

NOTE: Please use shielded video signal cable, 15-pin mini

D-SUB to 15-pin mini D-SUB with ferrite cores on

both ends (not included).

English-6

Using Optional Stand/Mounts

An optional stand or mounting apparatus can be installed

either while the unit is in the upright position or while the

unit is face-down.

To install the stand while in the upright position, lower the

monitor onto to the feet as shown (Figure 1). Use the handles

to support the display while lowering the support holes

underneath the display onto the feet.

If stand or mounting apparatus is to be installed while the

unit is face-down (Figure 2), be sure to lay the protective

sheet (the foam sheet that the unit was wrapped in)

underneath the unit on order to prevent damage to the

screen.

 is unit must be used with a stand or some type of

mounting apparatus.  is unit is not designed for use

without additional support.

For correct Installation and Mounting it is

recommended to use a trained, authorized dealer.

Failure to follow correct mounting procedures could

result in dame to the unit or to the installer.

Product warranty does not cover damage caused by

improper installation.

CAUTION:

To install, follow those instructions included with the

stand or mounting apparatus. Use only those devices

recommended by the manufacturer.

Make sure to install stand or mounting apparatus to the

unit while on a surface that is strong and stable enough

to support the weight of the unit, such as a  oor or

sturdy table.

Use the speci ed clasps for installation.

Take necessary steps to prevent the unit from tipping or

falling.

Mounting Location

 e ceiling and wall must be strong enough to support the

monitor and mounting accessories.

DO NOT install in locations where a door or gate can hit

the unit.

DO NOT install in areas where the unit will be subjected

to strong vibrations and dust.

DO NOT install near where the main power supply

enters the building.

DO NOT install in where people can easily grab and

hang onto the unit or the mounting apparatus.

When mounting in an enclosure or in a recessed area, as

in a wall, leave at least 2 inches (50mm) of space between

the monitor and the wall for proper ventilation (Figure 3).

•

Allow adequate ventilation or provide air conditioning

around the monitor, so that heat can properly dissipate

away from the unit and mounting apparatus.

•

50mm (2")

Installation

Figure 3

Figure 1

Figure 2

Tab le

Protective Sheet

English

English-7

Mounting on Ceiling

Ensure that the ceiling is sturdy enough to support the

weight of the unit and the mounting apparatus over

time, against earthquakes, unexpected vibrations, and

other external forces.

Be sure the unit is mounted to a solid structure within

the ceiling, such as a support beam. Secure the monitor

using bolts, spring lock washers, washer and nut.

DO NOT mount to areas that have no supporting

internal structure. DO NOT use wood screws or anchor

screws for mounting. DO NOT mount the unit to trim

or to hanging  xtures.

Maintenance

Periodically check for loose screws, gaps, distortions,

or other problems that may occur with the mounting

apparatus. If a problem is detected, please refer to

quali ed personnel for service.

Regularly check the mounting location for signs of

damage or weakness that may occur over time.

Please note the following when

mounting on wall or ceiling.

When using mounting accessories other than those that

are NEC approved, they must comply with the VESA-

compatible (FDMlv1) mounting method.

NEC strongly recommends

using size M8 screws

(16mm + thickness of

bracket in length). If using

screws longer than 16mm,

check the depth of the

hole.(Recommended Fasten

Force: 1125 - 1375N•cm)

NEC recommends mounting

interfaces that comply with

UL1678 standard in North

America.

Orientation

DO NOT use this monitor in the

portrait position. Doing so may cause

failure and void the warranty.

•

Cable Management

To conveniently manage cables, use the cable clamps

provided to bundle the power cord together with the signal

and audio cables at the back of the display.

To attach cable clamps:

1. Attach the cable clamps to the display. Insert the anchor

of the clamp into the hole on the back of the display.

 ere are 4 cable clamps and 4 clamp holes on the unit.

2. A er the cable clamp is positioned on the display, wrap

the end around the cables. Place the end of the clamp

into the slot near the anchor. Pull until cables are snug.

Clamps are designed to stay in place. Once in position,

they will be di cult to remove.

3. Cables can be routed to the right or le of the clamp.

Use the beaded bands to secure the cables together along

their length. Make sure the cables are fully supported.

To detach clamps:

Using pliers, twist the clamp 90 degrees and pull

outward. It is possible that the clamp can weaken over

time and removing it may cause damage to the clamp.

Installation - continued

Holes for Clamp

anchors

Anchor

Slot

Closed Clamp

16mm

Screw length should equal

depth of hole (16mm) + the

thickness of mounting bracket.

Unit

Mounting

Bracket

Screw

Thickness

of Bracket

English-8

Using the Remote:

Install the remote control batteries.

 e remote control is powered by AA batteries. To install or

replace batteries:

A. Press and slide to open the cover.

B. Align the batteries according to the (+)

and (–) indications inside the case.

C. Replace the cover.

CAUTION: Incorrect usage of batteries can result in leaks or

bursting. NEC recommends the following battery use:

Place “AA” size batteries matching the (+) and (-) signs

on each battery to the (+) and (-) signs of the battery

compartment.

Do not mix battery brands.

Do not combine new and old batteries, or mix brands.

 is can shorten battery life or cause liquid leakage of

batteries.

Remove dead batteries immediately to prevent battery

acid from leaking into the battery compartment.

Do not touch exposed battery acid, it may injure skin.

Do not drop or mishandle the remote.

Do not get the remote control wet. If the remote does get

wet, wipe dry immediately.

Avoid excessive heat and humidity.

Do not dispose of batteries in  re.

Please follow government regulations or public

environmental rules that apply in your country/area

when disposing of used batteries.

When replacing, use only conventional non-

rechargeable alkaline or manganese batteries.

 ere is a risk of explosion if batteries are replaced

incorrectly.

•

Operating Range for the Remote Control

Point the top of the remote control toward the monitor’s

remote sensor while pressing buttons.  e remote control

can be used from the front of the monitor at a maximum

distance of 7 m/23  . from the front of the Plasma monitor’s

remote control sensor.  e maximum horizontal and vertical

angle for use of the remote is 30 degree within a distance of

3.5 m/11.5  .

CAUTION

 e remote control may not function when direct sunlight

or strong illumination strikes the remote control sensor of

the Plasma monitor, or when there is an object in the path of

the sensor.

Handling the Remote Control

Do not open the remote control other than to install

batteries. Do not allow water or other liquid to splash onto

the remote control. If the remote control gets wet, wipe it dry

immediately.

Avoid exposure to heat and steam.

NOTE: If you do not intend to use the Remote Control for a

long period of time, remove the batteries.

Installation - continued

English

English-9

Part Names and Functions

Control Panel

1) POWER

Switches the power on/standby.

2) MUTE

Switches the audio mute ON/OFF.

3) INPUT

Switches between input sources.

Acts as SET button within the OSD menu.

4) PLUS (+)

Increases the setting adjustment within OSD menu.

5) MINUS (-)

Decreases the setting adjustment within OSD menu.

6) UP ( )

Increases the volume level when the OSD is o .

Moves area up to select which setting to is to be adjusted

within OSD menu.

7) DOWN ( )

Decreases the volume level when the OSD is o .

Moves down to select which setting is to be adjusted within

OSD menu.

8) EXIT

Activates the OSD menu when the OSD menu is o .

Exits from the current menu being displayed to the

previous menu within the OSD.

9) Remote control sensor and Power indicator

Receives the signal when using the wireless remote control.

Glows green when the monitor is active. Glows red when

the monitor is in Standby mode. Glows Amber when the

monitor is in POWER SAVE mode.

A red blinking Power indicator means that the monitor has

detected a failure. Contact quali ed personnel in case of

failure.

10) Main Power Switch

Seesaw switch to turn the main power on/o .

Mode Status indicator light

Power On Green

Standby Red

Power save Amber

Diagnosis

(Detecting failure)

Red blinking

OFFON

NOTE:

The POWER button does not completely turn off the

display. Use the Main Power Switch to completely turn off

the display.

English-10

EXTERNAL CONTROL

OUT

DVD/HD3

S-VIDEO IN

DVI AUDIO3

(MONO)

AUDIO2 AUDIO1VGA

Y Cr/Pr Cb/Pb

DVD/HD1

DVD/HD2

VIDEO

AC IN

SPEAKER (S)

3 4 5 6 7 8 10

13 14

Part Names and Functions

1) EXTERNAL CONTROL OUT (D-Sub 9 pin)

Connect RS-232C output to a second monitor.

2) EXTERNAL CONTROL (D-Sub 9 pin)

Connect RS-232C input to external equipment such as a

PC in order to control RS-232C functions.

3) DVD/HD3 (HDMI)

Input digital HDMI signals.

4) DVI

Input digital RGB signals from a computer or HDTV

device having a digital RGB output.

5) AUDIO3

Input the audio signal from external equipment such as a

computer, VCR or DVD player.

6) VGA (Mini D-Sub 15 pin)

Analog computer input.

7) AUDIO2

Input the audio signal from external equipment such as a

computer, VCR or DVD player.

8) DVD/HD1

Connect equipment such as a DVD player, HDTV device,

or set-top box.

9) DVD/HD2

Connect equipment such as a DVD player, HDTV device

or set-top.

10) AUDIO1

Input the audio signal from external equipment such as a

computer, VCR or DVD player.

11) S-VIDEO in

Input S-video.

12) VIDEO1

Composite video input.

13) EXTERNAL SPEAKER (L and R) connector

Connects to optional speakers. Output the audio signal

from AUDIO 1, 2, and 3 to external speakers.

NOTE: Speaker Terminal is for 8W + 8W (8 ohm).

14) AC IN

Connects with the supplied power cord.

Information:

For SCART connections there are 2 ways to connect:

SCART1: Connect R/G/B to the DVD/HD1 terminals and

composite sync. to the VIDEO1 terminal.

SCART2: Connect R/G/B + composite sync. to the VGA

terminal.

Terminal Panel

English

English-11

Part Names and Functions - continued

1) POWER ON/STANDBY

Switches the power on/standby.

*If the Power Indicator on the display is not glowing,

then no controls will work.

2) VIDEO

Switches the input signal to the VIDEO source.

3) RGB

Switches the input signal to the RGB source.

4) DVD/HD

Switches the input signal to the DVD/HD source.

5) PICTURE MODE

Selects Picture Mode: [STANDARD], [BRIGHT],

[CINEMA1], [CINEMA2], [DEFAULT].

STANDARD: for viewing in a bright room

BRIGHT: brighter picture than STANDARD

CINEMA1, 2: for viewing in a dark room, good for

movies

DEFAULT: factory default settings

6) SIZE

Set the aspect ratio of the image.

7) KEYPAD

Set REMOTE ID.

8) DISPLAY

Turn on/o the Information OSD.

Move selection up or down

10) AUTO SETUP

Adjusts the CLOCK PHASE, CLOCK, and POSITION

settings automatically. (Analog RGB signal input only)

11) POINTER

Turn on/o the pointer.

12) VOLUME

Increases/Decreases sound level.

13) SPLIT SCREEN

PIP: Picture-in-Picture mode.

S BY S: Side-by-side mode.

SINGLE: Returns to normal mode.

SWAP: Swaps the Split Screen images.

SELECT/FREEZE: Selects which input is active when

in split screen mode.

When the PICTURE FREEZE function (see OSD

FUNCTION) is operating, SELECT/FREEZE can be

used to display still pictures on the sub screen.

CAPTURE : Captures still picture.

14) REMOTE ID

Activates REMOTE ID function.

15) MENU

Turns ON/OFF menu mode.

16) SET

Makes selection.

17) - , +

Increases or decreases amount of adjustment.

18) EXIT

Goes to the previous menu.

19) ZOOM

Enlarges or reduces the picture.

20) MUTE

Mutes audio output.

21) SLEEP

Sleep timer.

22) PICTURE MEMORY

Switches memory settings from 1 to 6.

PICTURE

MEMORY

POWER ON

RGB DVD/HD VIDEO

PICTURE

MODE

DISPLAY

AUTO

SET UP

VOL

SPLIT SCREEN

REMOTE ID

SWAP

SET RESET

REMOTE CONTROLLER RU-M113

SLEEP

SELECT/FREEZE

CAPTURE

PIP

S BY S SINGLE

MUTE

ZOOM

POINTER

EXIT

SIZE

STANDBY

123

456

SET

Remote Control Functions

English-12

POWER

To turn the unit ON and OFF:

1. Plug the power cord into an AC outlet.

2. Press the Power button (on the unit).

 e monitor's ON/STANDBY indicator turns red and

the unit will be in STANDBY mode.

3. Press the POWER ON button on the remote control.  e

ON/STANDBY indicator will turn green when the unit

is active.

4. Press the STANDBY button (on the remote) or the

Power button (on the unit) to turn o the monitor.

DISPLAY

To check display settings press the DISPLAY button on the

remote.  e screen changes each time the DISPLAY button is

pressed. Display information will disappear a er 3 seconds.

DIGITAL ZOOM

Digital zoom can change the picture position or enlarge the

image on the screen.

1. Be sure ZOOM NAV function is o . Press the ZOOM

button (+ or -) to display the magnifying glass.

Press the ZOOM + button to enlarge the image.

Press the ZOOM - button to reduce the image.

Press the UP and DOWN or PLUS and MINUS buttons

to reposition the picture.

2. Press the POINTER button to hide the pointer.

POINTER

Use the Pointer to point to a speci c area on the screen.

Press the UP and DOWN or PLUS and MINUS buttons to

reposition the Pointer.

Main Power Switch Cover

Included with the display is a cover for the Main Power

Switch. Use this cover to prevent the unit from being

inadvertently powered o .

Place the tab on the cable cover into the rectangular slot on

the display.

 en using the screw provided, secure the cover to the

display.

Part Names and Functions - continued

TAB

SLOT

OFFON

Main Power

Switch

Cover

English

English-13

REMOTE CONTROL ID

 e remote control included with the display can be used

to control up to 26 individual monitors using what is

called the REMOTE CONTROL ID mode.  e REMOTE

CONTROL ID mode works in conjunction with the Monitor

ID, allowing control of up to 26 individual monitors. For

example: if there are many monitors being used in the same

area, a remote control in normal mode would send signals to

every monitor at the same time Figure 1. Using the remote

in REMOTE CONTROL ID mode will only operate one

speci c monitor within the group Figure 2.

TO SET REMOTE CONTROL ID:

While holding down the REMOTE ID SET button on the

remote control, use the KEYPAD to input the Monitor ID

(1-26) of the display to be controlled via remote.  e remote

can then be used to operate the monitor having that speci c

Monitor ID number.

When 0 is selected or when the remote control is in normal

mode, all monitors will be operated.

TO USE REMOTE CONTROL ID MODE

ID Mode - To enter ID Mode press the REMOTE ID SET

button and hold down for 2 seconds.

Normal Mode - To return to Normal Mode press the

REMOTE ID RESET button and hold down for 2 seconds.

In order for this feature to work properly, the display must be

assigned a Monitor ID number.  e Monitor ID number can

be assigned under the SETUP menu in the OSD (See page

17).

If Monitor ID is set to “ALL” , monitor is controled by remote

control not depend on remote ID.

Monitor ID:1 Monitor ID:2

Remote does

not work

Remote does

not work

Figure 2

Remote set up to

use Remote ID:3

Monitor ID:1 Monitor ID:2

Remote works Remote works

Figure 1

Remote in Normal

mode or the REMOTE

ID is set to 0

Remote Control ID Function

Part Names and Functions - continued

Monitor ID:3

Remote works

Monitor ID:3

Remote works

English-14

On-Screen Display (OSD)

Using the OSD

Use the Remote Control or the control panel on the front

of the unit to enter the on-screen display menu to adjust

settings.

1. Press the MENU button on the remote or the EXIT

button on the Control Panel.

2. Use the up and down buttons to select the desired menu.

3. Press the SET button to select a sub-menu or item for

adjustment.

4. Change the setting or adjustment by pressing the + and

- buttons on the Control Panel or the Remote Control.

5. Press the EXIT button on the Remote Control, on the

Control Panel to return to the previous menu.

NOTE: Not all menu functions may be available. To access

all functions the Advanced OSD option must be

turned on in the ADVANCED OSD menu.

Press UP or DOWN

button to select

sub-menu.

Press SET. Press UP, DOWN, PLUS,

or MINUS to select the

function or setting to be

adjusted.

Press MENU or EXIT.

Press UP or DOWN

button to select.

Press INPUT

button to decide.

Press UP, DOWN, PLUS,

or MINUS to select.

Press EXIT.

Remote

Control

Panel

OSD Screen

ADVANCED OSD is OFF. Not all OSD functions will be

available when the ADVANCED OSD is off.

Advanced OSD is ON. All OSD functions are shown, but

some OSD functions may not be available.

PICTURE MEMORY

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

TINT

COLOR TEMP.

FILM MODE

PICTURE MODE

OFF

HIGH

STANDARD

VGA

PICTURE

4&- .&/64&- $-04&

FUNCTIONSCREEN

FUNC.

INFOSET UP

PICTURE MEMORY

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

TINT

COLOR TEMP.

FILM MODE

PICTURE MODE

GAMMA

SET UP LEVEL

COLOR CONTROL

OFF

HIGH

STANDARD

2.2

VGA

PICTURE

FUNCTION

FUNC.

INFOSET UP

SCREEN

4&- .&/64&- $-04&

English

English-15

On-Screen Display (OSD)

Main Menu Sub Menu Sub Menu2 Explanation Default Reset

PICTURE PICTURE MEMORY Store picture menu settings and input terminal information. The

memory number is 1-6.

The "PICTURE MEMORY" screen appears when the SET button is

pressed on the "PICTURE MEMORY" MENU.

OFF YES

CONTRAST Adjusts the image brightness in relationship to the white level.

Press + or - to adjust.

50 YES

BRIGHTNESS Adjusts the image brightness in relationship to the background.

Press + or - to adjust.

50 YES

SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50 YES

COLOR Adjusts the color depth of the screen. Press + or - to adjust. 50 YES

TINT Adjusts the tint of the screen. Press + or - to adjust. 50 YES

NR Adjusts the amount of noise reduction. Press + or - to adjust. OFF YES

COLOR TEMP. Adjusts the color temperature of the entire screen. A low

color temperature will make the screen reddish. A high color

temperature will make the screen bluish.

MIDDLE YES

WHITE BALANCE.

GAIN RED The "WHITE BALANCE" appears when the SET button is pressed

on the "COLOR TEMP." OSD menu.

GAIN RED/GREEN/BLUE: Adjusts the white level of the white

balance.

50 YES

GAIN GREEN 50 YES

GAIN BLUE 50 YES

RESET Resets the factory default settings. Select "ON", then press the

SET button to reset.

OFF YES

FILM MODE Selects Film mode. ON YES

PICTURE MODE Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1],

[CINEMA2], [DEFAULT].

STANDARD: For watching in a bright room.

CINEMA1, 2: For watching in a dark room, especially good for

movies.

BRIGHT: Brighter picture than STANDARD.

DEFAULT: Restores factory default settings.

STANDARD YES

GAMMA

Available only when

the Advanced OSD

function in the

FUNCTION menu is

enabled.

Select a display gamma for best picture quality.

2.1, 2.2, 2.3, 2.4: The picture becomes darker as the number

increases.

S: Special gamma for certain types of movies. Raises the dark

parts and lowers the light parts of the image. (S-Curve)

These values are approximate.

2.2 YES

SET UP LEVEL

Available only when

the Advanced OSD

function in the

FUNCTION menu is

enabled.

Adjusts the video black level.

VIDEO signal input only.

0% YES

COLOR CONTROL

Available only when

the Advanced OSD

function in the

FUNCTION menu is

enabled.

RED Adjusts the levels of the Red, Green, Blue, Yellow, Magenta and

Cyan.

VIDEO and DVD/HD 1/2 input only.

50 YES

GREEN 50 YES

BLUE 50 YES

YELLOW 50 YES

MAGENTA 50 YES

CYAN 50 YES

RESET Resets the factory default settings. Select "ON", then press the

SET button to reset.

OFF YES

English-16

On-Screen Display (OSD)

Main Menu Sub Menu Sub Menu2 Explanation Default Reset

AUDIO BASS Adjusts the low frequency sound. Press + or - to adjust. 0 YES

TREBLE Adjusts the high frequency sound. Press + or - to adjust. 0 YES

BALANCE Adjusts the balance of L/R volume. Press + or - to adjust. 0 YES

AUDIO INPUT1 Select which audio input to use with the video source. VIDEO1 YES

AUDIO INPUT2 DVD/HD1 YES

AUDIO INPUT3 VGA YES

DVD/HD3 INPUT HDMI YES

SCREEN ASPECT MODE Selects aspect ratio of the displayed image. Press + or - to select. - -

V-POSITION Controls the vertical position of the image within the Display area

of the PDP.

Press + to move up. Press - to move down.

0YES

H-POSITION Controls the horizontal position of the image within the Display

area of the PDP.

Press + to move right. Press - to move left.

0YES

V-HEIGHT Adjusts the vertical size of the image. 0 YES

H-WIDTH Adjusts the horizontal size of the image. 0 YES

AUTO PICTURE ON: H-Position, V-Position, Clock and Clock Phase are adjusted

automatically.

OFF: H-Position, V-Position, Clock and Clock Phase are adjusted

manually.

VGA input only.

OFF NO

CLOCK PHASE Adjusts the visual “noise” on the image.

VGA input only.

0YES

CLOCK Press + to expand the width of the image on the right of the

screen.

Press - to narrow the width of the image on the left.

VGA input only.

0YES

UNDER SCAN

Available only when

the Advanced OSD

function in the

FUNCTION menu is

enabled.

ON: UNDERSCAN is selectable in the ASPECT MODE menu.

OFF: UNDERSCAN item is not selectable in the ASPECT MODE

menu.

Video signal input only.

OFF YES

SET UP

Some functions

available only

when the

Advanced OSD

function in the

FUNCTION

menu is

enabled.

The

LANGUAGE

and ALL

RESET

functions

are always

available.

LANGUAGE Select the language used by the OSD. ENGLISH NO

DVD/HD1 INPUT Selects whether to set the input of the DVD/HD1 connector.

COMPONENT : for Component input. (3BNC connectors)

SCART1 : for SCART input (3RCA connectors and VIDEO1 input)

(SCART1 available for Europe and World-Wide models only)

COMPONENT YES

D-SUB INPUT Selects whether to set the input of the mini D-SUB connector.

RGB : for RGB input

SCART2 : for SCART input

(SCART2 available for Europe and World-Wide models only)

RGB YES

HD SELECT Selects signal detection for similar 1080I signal manually.

1080I : Standard digital broadcasts

540P : Special digital broadcasts ( ex. DTC100 )

1080I NO

RGB SELECT If there is a problem with signal detection, this function forces the

monitor to display the signal at the desired resolution.

If no problem is detected, the only available option will be “AUTO”.

VGA input only.

AUTO YES

HDMI MODE Choose the HDMI mode based on the input device connected via

HDMI connector.

When a DVD player or similar equipment is connected, sets to

"HIGH".

When a PC or similar equipment is connected, sets to "LOW".

HIGH NO

DVI MODE PLUG/PLAY Choose the DVI mode based on the input device connected via

DVI connector and set the black level.

When a PC or similar equipment is connected, PLUG/PLAY is

"DVI-PC" and BLACK LEVEL is "LOW".

When a DVD player or similar equipment is connected, PLUG/

PLAY is "DVI-HD" and BLACK LEVEL is "HIGH".

DVI-PC NO

BLACK LEVEL LOW NO

COLOR SYSTEM The selected Color System depends on the video format of the

input signal.

VIDEO input only.

AUTO NO

English

English-17

On-Screen Display (OSD)

Main Menu Sub Menu Sub Menu2 Explanation Default Reset

SET UP

(continued)

BACK GROUND Chooses the brightness of background when there is no input

signal present.

GRAY YES

SIDE MASK Adjusts the color of the side mask when a 4:3 image is displayed.

Press + button, the bar will become lighter.

Press - button, the bar will become darker.

3YES

OSD DISPLAY OSD ON: Information about inputs, screen size, etc. is shown.

OFF: No information is shown.

ON YES

OSD

POSITION

Change the position of the menu between TOP LEFT and BTM

RIGHT. Press + or - to adjust.

TOP LEFT YES

OSD ORBITER ON: The menu position intermittently shifts eight dots while the

OSD is being displayed.

OFF: The menu position does not shift.

ON YES

OSD TRANSP. Adjusts the transparency level of the OSD.

Press + or - to adjust.

70% YES

MONITOR ID Sets the monitor ID number from 1-26 or to "ALL". ALL YES

ALL RESET Resets settings back to factory default values. OFF -

FUNCTION

Some functions

available only

when the

Advanced OSD

function in the

FUNCTION

menu is

enabled.

The

ADVANCED

OSD function

is always

available.

ADVANCED OSD ON: All menu items are shown for advanced users.

OFF: Some of the advanced menu items are not shown.

OFF YES

POWER SAVE Sets how long the monitor waits to go into power save mode after

a signal is lost.

VGA and DVI input and Separate HV sync. only.

OFF YES

INPUT SKIP Skips to next input if present input is no signal.

This function is valid only for INPUT key on the display.

OFF YES

SUB PICTURE SUB

P.D E TECT

This function automatically detects no input signal of sub screen.

This feature is available only picture-in-picture mode.

SUB P. DETECT: Sets availability of automatic detecting of sub

screen.

DISPLAY: Sets the appearance method of the sub screen.

SUB P. RATE: Sets the transparency of the sub screen.

AUTO YES

DISPLAY NORMAL YES

SUB P.RATE 100% YES

ZOOM NAV Sets the position of the zoom navigation image. BTM LFT YES

PICTURE FREEZE Sets the position of the captured still picture. S BY S1 YES

SCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image

Persistence.

PEAK BRIGHT : The brightness is decreased depending on

setting.

ORBITER : The screen image moves slightly with squeezing or

expanding.

INVERSE : The screen image is displayed alternately between

positive image and negative image, or the screen image is

displayed full white.

MANUAL YES

PEAK BRIGHT 100% YES

ORBITER AUTO1 YES

INVERSE/

WHITE

OFF YES

CLOSED CAPTION

(U.S. models only)

Chooses the closed caption setting. OFF YES

CAPTION CONT

(U.S. models only)

Chooses the brightness of the closed caption. NORMAL YES

INPUT DETECT INPUT Sets the input mode and the sound volume when the power turn

on.

LAST : last mode (the input that was last selected when the power

turn off.)

MULTI to DVI : ﬁ xed input mode.

AUTO : Searches the input with the signal automatically

PRIORITY : Sets the priority input for AUTO setting.

LAST YES

VOLUME LAST YES

PROTOCOL SET Sets protocol setting of RS-232C.

OFF : When NEC protocol is used (normal).

ON : When special protocol is used.

* Consult your dealer for details of protocol.

OFF YES

RS232C CONTROL Selects the mode of the monitor when using the RS-232C daisy

chain.

NORMAL YES

SIGNAL INFORMATION Display signal information such as frequencies, polarities, etc. - -

English-18

Operation

Picture Size Using Video Signals

Select one of seven picture sizes manually.

While viewing videos or digital video discs, perform the

following actions:

1. Press the SIZE button on the remote control.

2. To switch the screen sizes, press the SIZE button again

within 3 seconds.  e available sizes are NORMAL, FULL,

DYNAMIC, ZOOM, 2.35:1, 14:9, and UNDERSCAN.

If a 720p, 1080i, or 1080p signal is displayed, the available

sizes are FULL, 2.35:1, DYNAMIC, and UNDERSCAN.

If displaying an enhanced split-screen, the available sizes are

NORMAL and FULL.

NORMAL (4:3)

Images with a 4:3 (Normal) aspect ratio are displayed.

FULL

Horizontally expands anamorphic signals to display the

correct linearity.

Normal (4:3) images are horizontally expanded to  ll the

entire screen.

DYNAMIC

Vertically and horizontally expands the picture but at

di erent aspect ratios.

ZOOM

Vertically and horizontally expands the picture while

maintaining the correct aspect ratio.

2.35:1

Image is expanded at a 2.35:1 ratio to  ll the entire screen.

 e screen is  lled vertically; however, some information

will be lost on the le and right sides of the image.

Available for the following inputs:

Video, Component, or RGB input (480I, 480P, 576I, 576P,

720P, 1080I, 1080P)

To avoid image retention, use the 2.35:1 image size if black

bars are displayed at the top and bottom of the screen

showing the displayed image.

14:9

Image is displayed at a 14:9 aspect ratio.

Available for the following inputs:

Video, Component, or RGB input (480I, 480P, 576I, 576P)

UNDERSCAN

Standard televisions crop (Underscan) images. Utilize the

UNDERSCAN function in the SCREEN menu to display the

entire image.

NOTE: Depending on the type of component used, black

borders or signal noise may appear near the screen

edges while in UNDERSCAN mode.

Over a period of time, image ghosting, shadowing,

or burn-in may result from continuous display of

underscanned images. While in UNDERSCAN

mode, the brightness may change if a Macrovision

signal is input.

NOTE: Do not display 4:3 content in NORMAL mode for

extended periods of time to avoid image ghosting,

shadowing, or burn-in.

English

English-19

Picture Size Using Computer

Signals

To expand a 4:3 image to  ll the entire screen, switch to the

widescreen mode.

While viewing videos or digital video discs, perform the

following actions:

1. Press the SIZE button on the remote control.

2. To switch the screen sizes, press the SIZE button again

within 3 seconds.  e available sizes are NORMAL, FULL,

and ZOOM.

If an enhanced split-screen is displayed, the available sizes

are NORMAL and FULL.

NORMAL (4:3 or SXGA 5:4)

Images are displayed normally.

FULL

Horizontally expands anamorphic signals to display the

correct linearity.

Normal (4:3) images are horizontally expanded to  ll the

entire screen.

ZOOM

Vertically and horizontally expands the picture, while

maintaining the correct aspect ratio.

Information:

Supported resolutions: For further information on the

display output of the various VESA signal standards

supported by the unit, see pages 31 - 36.

When 1360 dot x 768 line wide XGA signals with a vertical

frequency of 60 Hz and a horizontal frequency of 47.7 kHz

are input:

1. Select an appropriate setting for the RGB SELECT mode.

2. Refer to the Resolutions Supported section of Model

Information on pages 31 - 36.

NOTE: Do not display 4:3 content in NORMAL mode

for extended periods of time to avoid image

shadowing, ghosting, or burn-in.

Operation - continued

English-20

Operation - continued

Split Screen Mode

To display multiple pictures on the screen, perform the

following actions:

1. Press the desired SPLIT SCREEN function button on the

remote (PIP, S BY S, SINGLE).

Only certain RGB signals are supported.

Split Screen mode works according to the table below.

Side by Side Mode

Press the -, +, p or q buttons to change the picture size.

Press the SWAP button to swap pictures.

Press the SELECT/FREEZE button to change the active

picture.

VGA

SWAP

VGA

VIDEO1

VGA

SELECT/FREEZE

VIDEO1 is active.

VGA is active.

S BY S

button

VGA

S BY S

button

SINGLE

button

PIP

button

PIP

button

SINGLE

button

VGA

Side by Side4-R Side by Side3 Side by Side4-L

button

Side by Side2-R Side by Side1 Side by Side2-L

button

PIP normal operation test

PIP

available

Sub source

VIDEO1 S-VIDEO DVD/HD1 DVD/HD2 DVD/HD3 SCART1 SCART2 VGA DVI

Main

source

VIDEO1 - - YES YES YES YES - - - - YES YES

S-VIDEO YES - - YES YES YES - - - - YES YES

DVD/HD1 YES YES - - YES YES - - - - YES YES

DVD/HD2 YES YES YES - - YES - - - - YES YES

DVD/HD3 YES YES YES YES - - YES YES YES - -

SCART1 - - - - - - - - YES - - - - - - YES

SCART2 - - - - - - - - YES - - - - - - YES

VGA YES YES YES YES YES - - - - - - YES

DVI YES YES YES YES - - YES YES YES - -

English

English-21

Picture-in-Picture Mode

Press the + and - buttons to change the position of the sub-

picture.

Press the p and q buttons to change the size of the sub-

picture.

Press the SELECT/FREEZE button to change the active

picture.

Displaying Input Signal

1. To make the desired picture active, press the SELECT/

FREEZE button.

2. To change the active signal, press the VIDEO, DVD/HD,

or RGB button.

 e input selection may also be changed by pressing the

INPUT button on the front of the unit.

Adjusting the OSD controls

1. To make the desired picture active, press the SELECT/

FREEZE button.

2. To display the main menu, press the MENU button.

3. Adjust the settings as desired.

NOTE: Some OSD functions may not be available in Split-

Screen mode.

Operation - continued

VGA

button

VGA

button

VGA

VIDEO1

VGA

English-22

Operation - continued

Picture Settings Menu

Storing picture settings

 is function stores the current input signal and PICTURE

menu settings in memory in order to recall these settings if

necessary. Up to six di erent settings can be stored.

Notes of up to 15 characters long can also be stored along

with each setting.

Example: Storing picture settings at MEMORY1

On the “PICTURE MEMORY” function under the

“PICTURE” menu, select “MEMORY1” and press the SET

button.  e “PICTURE MEMORY” screen appears.

PICTURE MEMORY

OFF: Picture memory not used.

MEMORY1 TO 6: Choose the desired memory slot to set.

 ere are 6 to choose from, independent of inputs.

SETTING THE MEMORY

Use the p and q buttons to select the desired memory slot,

from MEMORY1 to MEMORY6.

Use the t and u buttons to select “SET”, then press the SET

button.

If necessary, input a note.

RESETTING THE MEMORY

Use the p and q buttons to select the desired memory slot,

from MEMORY1 to MEMORY6, then use the t and u

buttons to select “RESET”, and press the SET button.

 e memory is cleared, and “—” is displayed in the “INPUT”,

“SIGNAL” and “NOTE” columns.

INPUTTING NOTES

Use the t and u buttons to select “NOTE”, then press the

SET button.

Use the p and q button to select the character.

Use the t and u buttons to move the cursor.

Use the SET button to delete the character at the cursor

position.

When you have  nished inputting the note, press the EXIT

button.

English

English-23

 is monitor uses RXD, TXD and GND

lines for RS-232C control.

 e reverse type cable (null modem cable)

should be used for RS-232C control.

 is Plasma monitor can be controlled via personal

computer using an RS-232C connection.

MONITOR ID and RS-232C CONTROL

Up to 26 individual monitors can be controlled through a

daisy chain via RS-232C connection.

1. Connect PC to the monitor.

Connect a PC’s RS-232C control output to the monitor's

RS-232C input. You can then connect the

RS-232C output from this monitor to another monitor’s

RS-232C input. Up to 26 monitors can be connected

using RS-232C.

2. Set Monitor ID and RS-232C Control mode.

For proper operation, the Monitor ID should be

set in the OSD menu of each monitor that is in the

chain.  e Monitor ID can be set under the “SETUP”

menu in the OSD.  e Monitor ID number can be set

within a range from 1 to 26 or set to "ALL". No two

monitors should share the same Monitor ID number.

It is recommended to number each monitor in a daisy

chain sequentially from 1.  e  rst monitor in the daisy

chain is designated as the primary monitor. Subsequent

monitors with the chain are secondary monitors.

In the “FUNCTION” menu on the  rst monitor in the

RS-232C daisy chain set the "RS232C CONTROL"

to "NORMAL". Set the "RS232C CONTROL" to

“SECONDARY” on all other monitors.

Functions that can be controlled via RS-232C:

Powering ON or OFF

Switching input signals

NOTE: If your PC (IBM or IBM compatible) is equipped

only with a 25-pin serial port connector, a 25-pin

serial port adapter is required. Contact your dealer

for details.

NOTE: In order to function, the RS-232C OUT terminal

can only be connected to another monitor of the

same model. Do not connect to other types of

equipment.

•

RS-232C

(Out)

RS-232C Cable RS-232C Cable

RS-232C (IN)

RS-232C (OUT)

OUT

RS-232C (IN)

RS-232C (OUT)

English-24

RS-232C - continued

 e following control sequence is used for a single monitor

When using the following control commands, all of the daisy-chained monitors

can be controlled at the same time from the primary monitor. However, reply and

status commands will only pertain to the primary monitor, and not to the secondary

monitors.

1) Interface

PROTOCOL RS-232C

BAUD RATE 9600 [bps]

DATA LENGTH 8 [bits]

PARITY BIT NONE

STOP BIT 1 [bit]

FLOW CONTROL NONE

2) Control command diagram

 e command is structured by the address code, function code, data code and end

code.  e length of the command is di erent for each function.

Address Code Function Code Data Code End Code

HEX 30h 30h Function Data 0Dh

ASCII '0' '0' Function Data

[Address code] 30h 30h (In ASCII code, '0' '0')  xed.

[Function code] A code of each  xed control move.

[Data code] A code of each  xed control data (number) and

not always indicated.

[End code] 0Dh (In ASCII code,

'' )  xed.

To control multiple monitors that are daisy-

chained together please use the extended control

command.

English

English-25

RS-232C - continued

3) Control sequence

1)  e command from a computer to the Plasma monitor will take 400ms.

2)  e Plasma monitor will send a return command 400ms* a er it has received

an encode. If the command is not received correctly,

the Plasma monitor will not send the return command.

3)  e personal computer checks the command and con rms if the

command which has been sent has been executed or not.

4)  is Plasma monitor sends various codes other than the return code. When

sending a control sequence via RS-232C, other codes from personal

computers will be ignored.

* e sending time of the return command may be delayed depending on the

monitor’s current activity (changing of the input signal, etc.).

[Example] Turn the power ON. (' ' is for ASCII code)

Sending commands

from the PC etc.

Status code from

Plasma monitor

Meaning

30 30 21 0D

'0' '0' '!' ' '

Command for

POWER ON

30 30 21 0D

'0' '0' '!' ' '

Command received

(Command echo back)

4) Operation commands

Operation commands execute the basic operation setting of this Plasma

monitor. It may not operate when changing the signal:

Operation ASCII HEX

POWER ON ! 21h

POWER OFF " 22h

INPUT VIDEO1 _v1 5Fh 76h 31h

INPUT S-VIDEO _v3 5Fh 76h 33h

INPUT DVD/HD1 _v2 5Fh 76h 32h

INPUT DVD/HD2 _v5 5Fh 76h 35h

INPUT DVD/HD3 _h1 5Fh 68h 31h

INPUT SCART2 _v6 5Fh 76h 36h

INPUT VGA _r2 5Fh 72h 32h

INPUT DVI _r1 5Fh 72h 31h

POWER OFF command should not be used less than 1 minute a er the power is

turned on.

POWER ON command should not be used less than 1 minute a er the power is

turned o .

•

English-26

Structure of the Read-command

ASCII HEX

Function Data Function Data

POWER ON vP 1 76h 50h 31h

POWER OFF vP 0 76h 50h 30h

INPUT VIDEO1 vI v1 76h 49h 76h 31h

INPUT S-VIDEO vI v3 76h 49h 76h 33h

INPUT DVD/HD1 vI v2 76h 49h 76h 32h

INPUT DVD/HD2 vI v5 76h 49h 76h 35h

INPUT DVD/HD3 vI h1 76h 49h 68h 31h

INPUT SCART2 vI v6 76h 49h 76h 36h

INPUT VGA vI r2 76h 49h 72h 32h

INPUT DVI vI r1 76h 49h 72h 31h

Picture Mode BRIGHT vM p1 76h 4Dh 70h 31h

Picture Mode STANDARD vM p2 76h 4Dh 70h 32h

Picture Mode CINEMA1 vM p3 76h 4Dh 70h 33h

Picture Mode CINEMA2 vM p4 76h 4Dh 70h 34h

Picture Mode DEFAULT vM p5 76h 4Dh 70h 35h

5) Read command

Host computer sends the command without Data-code to monitor.

A er receiving this command, the monitor returns the command with Data-code

of current status to host computer.

<ex> When the Host computer checks the Power status of monitor, the status of

monitor is powered-on.

Command from

computer

Command from

Monitor

Detail of command

30 30 76 50 0D

‘0’’0’’v’’P’[enter]

Ask about the power

status of monitor.

30 30 76 50 31 0D

‘0’’0’’v’'P'’1’[enter]

Monitor is powered-on.

RS-232C - continued

English

English-27

Troubleshooting

No picture

 e signal cable should be properly connected to the display

card/computer.

 e display card should be properly seated in its slot.

Front Power Switch and computer power switch should be in

the ON position.

Check to make sure that a supported mode has been selected

on the display card or system being used. (Please consult

display card or system manual to change graphics mode.)

Check the monitor and your display card with respect to

compatibility and recommended settings.

Check the signal cable connector for bent or pushed-in pins.

Power Button does not respond

Unplug the power cord of the monitor from the AC outlet to

turn o and reset the monitor.

Image persistence

Please be aware that Plasma Technology may experience a

phenomena known as Image Persistence. Image Persistence

occurs when a residual or “ghost” image of a previous image

remains visible on the screen. Unlike CRT monitors, Plasma

monitors’ image persistence is not permanent, but constant

images being displayed for a long period of time should be

avoided. To alleviate image persistence, turn o the monitor

for as long as the previous image was displayed. For example,

if an image was on the monitor for one hour and a residual

image remains, the monitor should be turned o for one hour

to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY

SOLUTIONS recommends displaying moving images and

using a moving screen saver at regular intervals whenever the

screen is idle or turning o the monitor when not in use.

Image is unstable, unfocused or

swimming is apparent

Signal cable should be properly attached to the Plasma

monitor, computer, or other input device.

Use the OSD screen controls to focus and adjust display by

increasing or decreasing the clock phase total. When the

display mode is changed, the OSD Image Adjust settings may

need to be readjusted.

Check the monitor and your display card with respect to

compatibility and recommended signal timings.

Image of component signal is greenish

Check to see if the DVD/HD input connector is selected.

LED on monitor is not lit

(no green or red color can be seen)

Main Power Switch should be in the ON position and power

cord should be connected.

Red LED on monitor is blinking

A certain failure might have occurred, please contact your

nearest authorized NEC DISPLAY SOLUTIONS service

facility.

•

Display image is not sized properly

Use the OSD screen controls to increase or decrease the clock

total.

Check to make sure that a supported mode has been selected

on the display card or system being used. (Please consult

display card or system manual to change graphics mode.)

Selected resolution is not displayed properly

Use OSD information to enter Information menu and con rm

that the appropriate resolution has been selected. If not, select

appropriate resolution.

No Sound

Check to see if speaker cable is properly connected.

Check to see if mute is activated.

Check to see if volume is set at minimum.

NOTE: It is possible to play audio from a source that is di erent

from the video source.

RS-232C does not work

Check the PROTOCOL SET in the FUNCTION menu.

Remote Control does not work

Make sure the batteries are inserted properly.

Test the batteries for strength/life.

Make sure to point the remote directly at the sensor on the

monitor.

Check if the remote is in Remote ID mode.

 e remote control may not function when in direct sunlight

or when there is strong illumination on the remote sensor of

the monitor.

•

English-28

Speciﬁ cations 42XC10

PDP Module Diagonal: 42 "/1058 mm

Pixel Pitch 0.900 mm (W)/0.676 mm (H)

Resolution 1024 x 768

Frequency Horizontal ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz

DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz

Vertical 24Hz to 120.4Hz

Panel Display Size 922 mm (W) x 519 mm (H)

36.3 in (W) x 20.4 in (H)

Input Signals DVI DVI-D 24pin Digital RGB DVI (HDCP)

VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*

VGA 15pin Mini D-sub Analog RGB 0.7V p-p, Input Impedance 75 ohm

VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*

Sync Separate: TTL level (Pos./Neg.)

Composite sync on Green Video: 0.3Vp-p Neg

DVD/HD1,2 RCA (Y, Cb/Pb, Cr/Pr) Component Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm

HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,

576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz

DVD/HD3

(HDMI)

HDMI Type-A Digital

Component

HDMI

1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,

480i@60Hz

VIDEO1 RCA Composite 1.0V p-p Input Impedance 75 ohm

NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60

S-VIDEO mini DIN 4 pin S-VIDEO Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),

0.3Vp-p/75ohm(PAL/SECAM)

NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60

Audio AUDIO Input RCA (L/R) X3 Analog Audio Stereo L/R 0.5Vrms

HDMI Type-A DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)

Speaker Output External Speaker Jack 8W + 8W (8 ohm)

External Control RS-232C: IN 9 Pin D-sub

RS-232C: OUT 9 Pin D-sub (daisy chain)

Power Supply 4.4-1.8A@100-240V AC, 50/60Hz

Operational Environment Temperature 0˚ to 40˚C / 32˚ F to 104˚ F

Humidity 20% to 80% (without condensation)

Storage Environment Temperature -10˚C to 50˚C / 14˚ F to 122˚ F

Humidity 10 - 90% (without condensation) / 90% - 2% x (Temp - 40°C) regarding over 40°C

Dimensions (WxHxD) Net 1036mm(W) x 649mm(H) x 130mm(D) / 40.8"(W) x 25.6"(H) x 5.1"(D)

Gross 1220mm(W) x 900mm(H) x 360mm(D) / 48.0"(W) x 35.4"(H) x 14.2"(D)

We ig ht

(without speaker and stand )

Net 34.5 kg / 76.1 lbs

Gross 42.5 kg / 93.7 lbs

VESA compatible arm

mounting interface

700mm x 300mm

4 Holes (screw M8 Depth 16mm)

Complied Regulatory

and Guidelines

UL 60065/CSA C22.2 No.60065/EN60065/IEC60065

FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick

Power Management VESA DPM (Separate HV Sync. only)

Plug & Play VESA DDC2B

Accessories Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),

Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps

*Compressed Image

English

English-29

Speciﬁ cations 50XC10

PDP Module Diagonal: 50"/1269 mm

Pixel Pitch 0.81 mm (W)/0.81 mm (H)

Resolution 1365 x 768

Frequency Horizontal ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz

DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz

Vertical 24Hz to 120.4Hz

Panel Display Size 1106 mm (W) x 622 mm (H)

43.5 in (W) x 24.5 in (H)

Input Signals DVI DVI-D 24pin Digital RGB DVI (HDCP)

VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*

VGA 15pin Mini D-sub Analog RGB 0.7V p-p, Input Impedance 75 ohm

VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*

Sync Separate: TTL level (Pos./Neg.)

Composite sync on Green Video: 0.3Vp-p Neg

DVD/HD1,2 RCA (Y, Cb/Pb, Cr/Pr) Component Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm

HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,

576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz

DVD/HD3

(HDMI)

HDMI Type-A Digital

Component

HDMI

1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,

480i@60Hz

VIDEO1 RCA Composite 1.0V p-p Input Impedance 75 ohm

NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60

S-VIDEO mini DIN 4 pin S-VIDEO Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),

0.3Vp-p/75ohm(PAL/SECAM)

NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60

Audio AUDIO Input RCA (L/R) X3 Analog Audio Stereo L/R 0.5Vrms

HDMI Type-A DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)

Speaker Output External Speaker Jack 8W + 8W (8 ohm)

External Control RS-232C: IN 9 Pin D-sub

RS-232C: OUT 9 Pin D-sub (daisy chain)

Power Supply 6.0-2.6A@100-240V AC, 50/60Hz

Operational Environment Temperature 0˚ to 40˚C / 32˚ F to 104˚ F

Humidity 20% to 80% (without condensation)

Storage Environment Temperature -10˚C to 50˚C / 14˚ F to 122˚ F

Humidity 10 - 90% (without condensation)/ 90% - 2% x (Temp - 40°C) regarding over 40°C

Dimensions (WxHxD) Net 1221mm(W) x 748mm(H) x 130mm(D) / 48.1"(W) x 29.4"(H) x 5.1"(D)

Gross 1400mm(W) x 980mm(H) x 360mm(D) / 55.1"(W) x 38.6"(H) x 14.2"(D)

We ig ht

(without speaker and stand )

Net 49.0 kg / 108.0 lbs

Gross 59.0 kg / 130.1 lbs

VESA compatible arm

mounting interface

700mm x 300mm

4 Holes (screw M8 Depth 16mm)

Complied Regulatory

and Guidelines

UL 60065/CSA C22.2 No.60065/EN60065/IEC60065

FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick

Power Management VESA DPM (Separate HV Sync. only)

Plug & Play VESA DDC2B

Accessories Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),

Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps

*Compressed Image

English-30

Speciﬁ cations 60XC10

PDP Module Diagonal: 60"/1514 mm

Pixel Pitch 0.966 mm (W)/0.966 mm (H)

Resolution 1366 x 768

Frequency Horizontal ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz

DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz

Vertical 24Hz to 120.4Hz

Panel Display Size 1320 mm (W) x 742 mm (H)

51.9 in (W) x 29.2 in (H)

Input Signals DVI DVI-D 24pin Digital RGB DVI (HDCP)

VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*

VGA 15pin Mini D-sub Analog RGB 0.7V p-p, Input Impedance 75 ohm

VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*

Sync Separate: TTL level (Pos./Neg.)

Composite sync on Green Video: 0.3Vp-p Neg

DVD/HD1,2 RCA (Y, Cb/Pb, Cr/Pr) Component Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm

HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,

576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz

DVD/HD3

(HDMI)

HDMI Type-A Digital

Component

HDMI

1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,

480i@60Hz

VIDEO1 RCA Composite 1.0V p-p Input Impedance 75 ohm

NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60

S-VIDEO DIN 4 pin S-VIDEO Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),

0.3Vp-p/75ohm(PAL/SECAM)

NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60

Audio AUDIO Input RCA (L/R) X3 Analog Audio Stereo L/R 0.5Vrms

HDMI Type-A DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)

Speaker Output External Speaker Jack 8W + 8W (8 ohm)

External Control RS-232C: IN 9 Pin D-sub

RS-232C: OUT 9 Pin D-sub (daisy chain)

Power Supply 7.8-3.2A@100-240V AC, 50/60Hz

Operational Environment Temperature 0˚ to 40˚C / 32˚ F to 104˚ F

Humidity 20% to 80% (without condensation)

Storage Environment Temperature -10˚C to 50˚C / 14˚ F to 122˚ F

Humidity 10 - 90% (without condensation)/ 90% - 2% x (Temp - 40°C) regarding over 40°C

Dimensions (WxHxD) Net 1447mm(W) x 876mm(H) x 130mm(D) / 57.0"(W) x 34.5"(H) x 5.1"(D)

Gross 1620mm(W) x 1100mm(H) x 360mm(D) / 63.8"(W) x 43.3"(H) x 14.2"(D)

We ig ht

(without speaker and stand )

Net 70.0 kg / 154.3 lbs

Gross 83.0 kg / 183.0 lbs

VESA compatible arm

mounting interface

700mm x 300mm

4 Holes (screw M8 Depth 16mm)

Complied Regulatory

and Guidelines

UL 60065/CSA C22.2 No.60065/EN60065/IEC60065

FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick

Power Management VESA DPM (Separate HV Sync. only)

Plug & Play VESA DDC2B

Accessories Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),

Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps

*Compressed Image

English

English-31

Specification of the signal

Sig.

nySM

NIM

FLA

TUP

qerf

fVnoituloseR

no.

H X V Signal Type

(kHz) terminal (4:3) (16:9) terminal (4:3) (16:9) H V presence Gr. No. Item

IBM PC/AT 1

640 X 400 400line 70.1 31.5 VGA

-- Yes - -

DVI

- - - - - - Neg. Neg. Yes 1 640X400

Compatible

720 X 400 400line --

.07

(DVI-PC)

- - Yes - - Neg. Neg. Yes 1 720X400

Computers

---

--9.

4 720 X 350 350line

eN--

---

1.0

640 X 480 VGA

Y.g

N.g

Nse

eYs

.27

---

eN.g

eNse

eYs

.7357

eYs

3.34588

--s

Y1.154

.0019

Nse

eYs

3.164

.0210

848 X 480 Wide-VGA 0

Y.s

oP--

Y--13

12 852 X 480 Wide-VGA 0

306

13 800 X 600 SVGA -

-s

eYs

Y2.533.65

-s

eYs

9.733.0641

-s

eYs

Y1.842

.27

-s

eY.s

Pse

Yse

Y9.64

5761

-s

.so

7.351

.5871

-s

eYs

seY368.9981

-s

P.s

eYs

eYseY7.5702191

20 1024 X 768 XGA

Nse

eYs

seY

eY4.8406

Y.g

N.g

eYs

seY

.07

Y.g

Yse

Y9.

-s

oP.so

YseY

Yse

-s

Y.s

Pse

eYse

Y7.86

5842

---

eY.g

geNse

seYseY

seY

5.08

6.00152

---

-s

eY.g

eNseY

eYse

eYseYseY5.594.91162

27 1152 X 864 XGA

---

eY.g

seY

eYseYs

YseY7.3506

---s

.ge

eYseYseYseY9.462782

---s

seYseYseYseY5.765792

1280 X 768 Wide-XGA --

--s

Y.soP

seY

-1.

42.

1-867X

8213seY.

oP--s

Y----seY--848.9513

oP.

Y-

---

8.749

.952

Y.s

eN--

---

-658

9633

--se

----seY

-8

.75

2743

Neg. Pos.

Yes 6 1280X768

35 1280 X 800 Wide-XGA 0

8X08

Y.soP.

--seY--

-seY--7.948.95

1280 X 854 Wide-XGA

---seY.

--se

Y-

---

1.35

37 1280 X 960 Wide-XGA

-s

.soP.s

YseYse

606

-s

eY.s

seYseYs

eY2*s

seY9.58588

39 1360 X 768 Wide-XGA

3seY

P.s

-seY

---

7.74

40 1376 X 768 Wide-XGA 8

oP.

geN--

Y-

---

3.8

.95

41 1280 X 1024 SXGA 60 64 Yes *1 Yes Yes Yes *1 Yes Yes Pos. Pos. Yes 9 1280X1024

.soP

1*seY

YseY1*

Y08

5724

oP.soP

Y1*seY2*seY2*seY2*1*seY1.19583

-s

.so

P------2*seY2*seY2*1*seY5.8011.00144

45 1400 X 1050 SXGA+ s 9 1400X1050

Y.soP.geNseYseYseYseYseYseY4606

050

oP.geNseYseYseYs

.560664

---

.so

.geNse

Yse

2*s

seY3.28

9.47

Y.soP.geN

----

Y2*s

seY9.39

49 1680 X 1050 Wide-SXGA

seY.soP.geN--se

Y-

---

3.56

50 1600 X 1200 UXGA 60 75 Yes *2 Yes *2 Yes *2 Yes Yes Yes Pos. Pos. Yes 8 1600X1200

----seY.soP.soP-----

2*s

Y2*seY

2*seY3.18

-se

Y.so

soP

---2*

2*seY2*

eY5

Y.so

.so

-2*seY2*

eY2*se

.395735

Y.so

.so

-2*seY2*

eY2*seY3.6015845

55 1920 X 1080 --

eY----

2.6

----seY.soP.soP--seY

--------5.760665

57 1920 X 1200 Wide-UXGA 0021X02918seY.soP.geN--------2*seY--6.479.95

58 1920 X 1200RB Wide-UXGA ----seY.soP.geN--seY----2*seY--4706

Apple Macintosh®

640 X 480 Mac13" -----GnocnySGnocnyS------seYseYseY537.66

832 X 624 Mac16" -

---

Gnoc

nyS

Gno

cnyS

-seYseYs

Y7.946.

83 1024 X 768 Mac19" -----GnocnySGn

ocnyS------s

YseY

eY2.

.47

1152 X 870 Mac21" -----Gno

nySGno

nyS----

--se

Y7.86

1440 X 900 Apple17 ----seY

oP.ge

--s

Y-

--seY

9.55

EWS Series

Work Station EWS4800 60 64.6 Yes *1 Yes Yes Yes *1 Yes Yes Neg. Neg. Yes - - - -

1280 X 1024

71.2 75.1 Yes *1 Yes Yes Yes *1 Yes Yes Neg. Neg. Yes - - - -

1280 X 1024 HP 72 78.1 Yes *1 Yes Yes Yes *1 Yes Yes - - - - - - -

94 1152 X 900 SUN -----c

nyS

cny

eYs

95 1152 X 900

---

nySCcnySCs

Yse

7.176

96 1280 X 1024 76.1 81.1 Yes *1 Yes Yes Yes *1 Yes Yes C Sync C Sync - - - - -

97 1024 X 768 SGI 867X42014---seYseYseYse

seYseY7.9406

1280 X 1024

60 63.9 Yes *1 Yes Yes Yes *1 Yes Yes - - - - - - -

BGRyt

lanA

EZI

42XC10 Supported Resolutions (PC)

- - NORMAL (4:3) FULL(16:9 ) (*1) (*2)

Not Supported 768 pixels x 768 lines 1024 pixels x 768 lines Aspect ratio is 5:4 (720x768) Rough Sampling

English-32

42XC10 Supported Resolutions (Video)

Specification of the signal

Sig. tc

FLA

NI.

ulo

no.

H X V Signal Type

(kHz) terminal (4:3) (16:9)

(non-linear)

SCAN terminal (4:3) (16:9)

(non-linear)

SCAN Gr. No. Item Item

Video

101 3.58NTSC

59.9 15.8

Video1 Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

Composite / S 102

4.43NTSC 59.9 15.8

S-Video

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

103

PAL

----

seYs

104 PAL60 --

------

seY

Yse

105 PAL-N

-----

106

PAL-M -

----

---

-3*se

seYse

107 SECAM

---

----

3*s

eYse

seYs

Y6.5

Y,Pb(Cb),Pr(Cr) SD 111 480I

59.9 15.8

DVD/HD1 Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

112 576I 50 15.6

DVD/HD2

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

113 480P

---

3*se

Yse

9.95

114

576P

----

3*seYse

Yse

1305

HD 115 720P

----

3*s

eYs

5.7305

116

720P

----

-----

3*s

eY-

-5

117 1080I

----

eYs

----s

eYseY

-1

118 1080I

----

3*s

eYs

eYseY

306

119

1080P -

3*s

eYs

-se

--3.

120

1080P

---

--5

7606

121

1080P

---

3*s

eY-

122 1080P

----

-seY

eY-

7242

123

1080P --

-------

seY

--s

-8

RGB(Video signal) SD 131 480I *4 59.9 15.8 VGA Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

132

576I *4

50 15.6

(SCART1-2)

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

133 480P

---

eYs

Yse

134

576P --

---

----

*se

HD 135 720P -----

----

--3

seYs

Y--

eYseY--5.7305

136 720P

3*s

eYs

Y-

-5

137 1080I --

--------

eYseY--1.8205

138 1080I

3*s

----se

YseY--8.3306

139 1080P

----

3*s

eYs

----

seYseY

-3

140 1080P

----

3*s

eYs

seYseY-

-5.760

141

1080P

3*s

----

--8.3303

142 1080P -----

-------

-3

seYseY---

-s

--7242

143 1080P

----

-----

eY-

---seYseY--8252

144

1080A/540P RCA STB

Y-

--s

Y-

-8

.3306

Digital SD

161 640 X 480P 59.9 / 60.0 31.5 / 31.5 - - - - - - - - - - - - - - DVI

Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 - - - - - -

(EIA/CEA-861) 162 720 (1440) X 480I 59.9 / 60.0 15.7 / 15.8 - - - - - - - - - - - - - -

(DVI-HD)

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

163 720 X 480P 59.9 / 60.0 31.5 / 31.5 - - - - - - - - - - - - - - Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

164 720 (1440) X 576I

-------------

.5105

DVD/HD3

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

165

720 X 576P

---

---3

.1305

(HDMI)

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

166 1280 X 720P 59.9 / 60.0 45.0 / 45.0 - - - - - - - - - - - - - - - - Yes Yes - - - - Yes Yes *3 - - - - - -

167

1920 X 1080I 59.9 / 60.0 33.7 / 33.8 - - - - - - - - - - - - - - - - Yes Yes - - - - Yes Yes *3 - - - - - -

168 1920 X 1080P 59.9 / 60.0 67.4 / 67.5 -- -- -- -- -- -- -- -- Yes Yes -- -- Yes Yes *3 -- -- - -

169 1280 X 720P -

seY----s

-----

-5

170

1920 X 1080I

----3*s

Y-

---s

---

---1.

171 1920 X 1080P

-3*s

Y-

------

---

-3

172 1920 X 1080P

-3*s

Y----s

--------

----

173 1920 X 1080P -

3*seY

seY-

-seYs

Y--

-----

-7

174 1920 X 1080P --

3*se

Yse

Y-

------

----

-8

Native 191

1366 X 768 --

----

Y--

----------

3.7406

Resolution 192 1024 X 768

----

*seY-------------

-3.7406

193

853 X 480 -

----

Y-

-----

--------03

RGB select

ati

anA

SIZE

- - NORMAL(4:3) FULL(16:9) (*3) (*4)

Not Supported 768 pixels x 768 lines 1024 pixels x 768 lines Displayed by Underscan mode (100%) SCART input available

English

English-33

Specification of the signal

Sig.

LUFLA

UPNI

noi

no. H X V Signal Type

(kHz) terminal (4:3) (16:9) terminal (4:3) (16:9) H V presence Gr. No. Item

IBM PC/AT 1 640 X 400 400line 70.1 31.5

VGA

-- Yes - -

DVI

- - - - - - Neg. Neg. Yes 1 640X400

Compatible 2 720 X 400 400line 70.1 31.5 - - Yes - - (DVI-PC) - - Yes - - Neg. Neg. Yes 1 720X400

Computers

--s

Y-

---s

3583

Pos.

Yes - - - -

720 X 350 350line 70.1 31.5 - - Yes - - - - Yes - -

Neg. Neg.

Yes 1 720X350

5 640 X 480 VGA 59.9 31.5 Yes Yes Yes Yes Yes Yes Neg. Neg. Yes 2 640X480

eYs

.73

.276

---

-s

eYs

5.73577

eN.g

eNs

3.34588

----

eY.

eYse

Yse

.15

4.0

eYs

eYse

Yse

164

.021

848 X 480 Wide-VGA

P.s

-s

Y-

12 852 X 480 Wide-VGA 60 31.7 - - Yes - - - - Yes - - Neg. Neg. Yes 2 852X480

800 X 600 SVGA 56.3 35.2 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

eYse

Yse

seY9.733.0641

eYse

Yse

YseY

.842.27

----

eY.s

P.s

eYse

YseYseY9.645761

eYs

eYseY7.351.5871

eY.s

oP.s

eYs

eYse

seY

seY368.9981

eYse

seYseY7

.57021

1024 X 768 XGA 60 48.4 Yes Yes Yes Yes Yes Yes Neg. Neg. Yes 3 1024X768

5se

.geN

Yse

seY

22 71.9 57.9 Yes Yes Yes Yes Yes Yes

Neg. Neg.

Yes 6 1024X768

75 60 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

85 68.7 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

25 100.6 80.5 Yes Yes Yes Yes Yes Yes Neg. Neg. Yes - - - -

119.4 95.5 Yes Yes Yes Yes Yes Yes Neg. Neg. Yes - - - -

27 1152 X 864 XGA 60 53.7 Yes Yes Yes Yes Yes Yes Pos. Neg. Yes - - - -

28 72 64.9 Yes Yes Yes Yes Yes Yes Pos. Neg. Yes - - - -

29 75 67.5 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

1280 X 768 Wide-XGA 56.2 45.1 - - Yes - - - - - - - - Pos. Pos. Yes - - - -

848.95

3 - - Yes - - - - Yes - - Pos. Neg.

Yes 3 1280X768-1

.74

.95

- - Yes - - - - Yes - -

Neg. Pos. Yes 3 1280X768-2

eY--

--se

.96

34 72

57.8

- - Yes - - - - Yes - - Neg. Pos. Yes 6 1280X768

1280 X 800 Wide-XGA 59.8 49.7 - - Yes - - - - Yes - - Neg. Pos. Yes 4 1280X800

1280 X 854 Wide-XGA 60 53.1 - - Yes - - - - Yes - - Neg. Neg. Yes - - - -

1280 X 960 Wide-XGA 60 60 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

38 85 85.9 Yes *2 Yes *2 Yes *2 Yes Yes Yes Pos. Pos. Yes - - - -

1360 X 768 Wide-XGA 60 47.7 - - Yes - - - - Yes - - Pos. Pos. Yes 3 1360X768

40 1376 X 768 Wide-XGA

59.9 48.3 - - Yes - - - - Yes - - Neg. Pos. Yes 3 1376X768

1280 X 1024 SXGA 60 64 Yes *1 Yes Yes Yes *1 Yes Yes Pos. Pos. Yes 9 1280X1024

42 75 80 Yes *1 Yes Yes Yes *1 Yes Yes Pos. Pos. Yes - - - -

85 91.1 Yes *1 *2 Yes *2 Yes *2 Yes *1 Yes Yes Pos. Pos. Yes - - - -

44 100.1 108.5 Yes *1 *2 Yes *2 Yes *2 - - - - - - Pos. Pos. Yes - - - -

1400 X 1050 SXGA+

60 64

Yes Yes Yes Yes Yes Yes Neg. Pos. Yes 9 1400X1050

.560664 Yes Yes Yes Yes Yes Yes

Neg. Pos.

Yes 7 1400X1050

74.9 82.3 Yes *2 Yes *2 Yes *2 Yes Yes Yes Neg. Pos. Yes - - - -

48 85 93.9 Yes *2 Yes *2 Yes *2 - - - - - - Neg. Pos. Yes - - - -

1680 X 1050 Wide-SXGA

60 65.3 - - Yes - - - - Yes - - Neg. Pos. Yes 7 1680X1050

50 1600 X 1200 UXGA

60 75 Yes *2 Yes *2 Yes *2 Yes Yes Yes Pos. Pos. Yes 8 1600X1200

51 65 81.3 Yes *2 Yes *2 Yes *2 - - - - - - Pos. Pos. Yes - - - -

70 87.5 Yes *2 Yes *2 Yes *2 - - - - - - Pos. Pos. Yes - - - -

75 93.8 Yes *2 Yes *2 Yes *2 - - - - - - Pos. Pos. Yes - - - -

54 85 106.3 Yes *2 Yes *2 Yes *2 - - - - - - Pos. Pos. Yes - - - -

55 1920 X 1080

50 56.2 - - - - - - - - Yes - - Pos. Pos. Yes - - - -

60 67.5 - - - - - - - - Yes - - Pos. Pos. Yes - - - -

57 1920 X 1200 Wide-UXGA 59.9 74.6 - - Yes *2 - - - - - - - - Neg. Pos. Yes 8 1920X1200

1920 X 1200RB Wide-UXGA

--se

.soP.geN-

seY-

--2*

--4

706

Apple Macintosh® 81

640 X 480 Mac13"

66.7 35 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

832 X 624 Mac16" 74.6 49.7 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

1024 X 768 Mac19"

74.9 60.2 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

1152 X 870 Mac21" 75.1 68.7 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

85 1440 X 900 Apple17 59.9 55.9 - - Yes - - - - Yes - - Neg. Pos. Yes - - - -

EWS Series 91 Work Station EWS4800

60 64.6 Yes *1 Yes Yes Yes *1 Yes Yes Neg. Neg. Yes - - - -

92 1280 X 1024 71.2 75.1 Yes *1 Yes Yes Yes *1 Yes Yes Neg. Neg. Yes - - - -

1280 X 1024 HP 72 78.1 Yes *1 Yes Yes Yes *1 Yes Yes - - - - - - -

94 1152 X 900 SUN 66 61.8 Yes Yes Yes Yes Yes Yes C Sync C Sync - - - - -

1152 X 900 76 71.7 Yes Yes Yes Yes Yes Yes C Sync C Sync - - - - -

1280 X 1024 76.1 81.1 Yes *1 Yes Yes Yes *1 Yes Yes C Sync C Sync - - - - -

97 1024 X 768 SGI 60 49.7 Yes Yes Yes Yes Yes Yes - - - 4 1024X768

98 1280 X 1024 60 63.9 Yes *1 Yes Yes Yes *1 Yes Yes - - - - - - -

gol

anA

EZI

50XC10 Supported Resolutions (PC)

- - NORMAL (4:3) FULL (16:9) ( *1) (*2)

Not Supported 1024 pixels x 768 lines 1365 pixels x 768 lines Aspect ratio is 5 :4 (960x768 ) Rough Sampling

English-34

50XC10 Supported Resolutions (Video)

Specification of the signal

Sig. tc

FLA

NI.

ulo

no.

H X V Signal Type

(kHz) terminal (4:3) (16:9)

(non-linear)

SCAN terminal (4:3) (16:9)

(non-linear)

SCAN Gr. No. Item Item

Video

101 3.58NTSC

59.9 15.8

Video1 Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

Composite / S 102

4.43NTSC 59.9 15.8

S-Video

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

103

PAL

----

seYs

104

PAL60 --

------

seY

Yse

105 PAL-N

-----

YseY

106 PAL-M

----

seY

.95

107 SECAM

---

-------3*s

eYse

eYs

Yse

Y,Pb(Cb),Pr(Cr) SD

111

480I

59.9 15.8 DVD/HD1

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

112 576I 50 15.6

DVD/HD2

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

113 480P

---

3*se

seYs

Y5.1

.95

114 576P 50 31.3 Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

HD 115

720P -

------

3*s

eYs

.73

116

720P

----

---

-----

3*s

eY-

-5

117 1080I

----

3*s

eYs

-se

--1.820

118 1080I -

----

3*seYs

seYseY-

306

119 1080P -

3*s

eYs

----s

-3

.6505

120 1080P

---

eYseY

-5.7

121 1080P

---

3*s

8.3303

122

1080P

24 27

-- Yes Yes -- -- Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

123 1080P 25 28 -- Yes Yes -- -- Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

RGB(Video signal) SD 131 480I *4 59.9 15.8 VGA Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

132

576I *4

50 15.6

(SCART1-2)

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

133 480P

---

eYs

Yse

134

576P

50 31.3 Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

HD 135

720P

eYs

Y-

-5

.7305

136 720P

----

-----

eY-

YseY--5406

137 1080I -

---

--1.8205

138 1080I

------

3*s

seYseY--8.3306

139

1080P -

------------

-3*seYse

eY--3.

140 1080P

----

3*s

seYseY--

.7606

141 1080P -

---

3*s

----seYseY--8.3303

142

1080P

24 27

-- Yes Yes -- -- Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

143 1080P 25 28 -- Yes Yes -- -- Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

144

1080A/540P RCA STB P

--------

Y---

seYseY

-8

Digital SD 161

640 X 480P

59.9 / 60.0 31.5 / 31.5 - - - - - - - - - - - - - -

DVI

Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 - - - - - -

(EIA/CEA-861)

162 720 (1440) X 480I 59.9 / 60.0 15.7 / 15.8 - - - - - - - - - - - - - -

(DVI-HD)

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

163

720 X 480P

59.9 / 60.0 31.5 / 31.5 - - - - - - - - - - - - - - Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

164 720 (1440) X 576I -----

--------6.5105 DVD/HD3

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

165 720 X 576P -----------

-3.1305 (HDMI) Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

HD 166

1280 X 720P

59.9 / 60.0 45.0 / 45.0 - - - - - - - - - - - - - - - - Yes Yes - - - - Yes Yes *3 - - - - - -

167

1920 X 1080I

59.9 / 60.0 33.7 / 33.8 - - - - - - - - - - - - - - - - Yes Yes - - - - Yes Yes *3 - - - - - -

168 1920 X 1080P

59.9 / 60.0 67.4 / 67.5

-- -- -- -- -- -- -- -- Yes Yes -- -- Yes Yes *3 -- -- - -

169 1280 X 720P

-3*s

Y--

-----------5.7305

170 1920 X 1080I

-3*s

Y----s

--------

------

.82

171 1920 X 1080P ----

Y-

eYs

Y----------------3.6505

172 1920 X 1080P

-3*s

Yse

Y-

---

---8.33

173 1920 X 1080P 24 27 -- -- -- -- -- -- -- -- Yes Yes -- -- Yes Yes *3 -- -- - -

174 1920 X 1080P 25 28 -- -- -- -- -- -- -- -- Yes Yes -- -- Yes Yes *3 -- -- - -

Native

191

1366 X 768

------

Y----

---

----

-3

.7406

Resolution 192

1024 X 768 -

-----

3*se

Y-

----

---3

.740

193 853 X 480 60 30 -- -- -- -- -- -- -- -- Yes *3 -- -- -- -- -- -- -- - -

RGB select

ati

anA

SIZE

- - NORMAL (4:3) FULL (16:9) (*3) (*4)

Not Supported 1024 pixels x 768 lines 1365 pixels x 768 lines Displayed by Underscan mode (100%) SCART input available

English

English-35

Supported Resolutions (PC) 60XC10

Specification of the signal

Sig.

LUFLA

UPNI

noi

no. H X V Signal Type

(kHz) terminal (4:3) (16:9) terminal (4:3) (16:9) H V presence Gr. No. Item

IBM PC/AT 1 640 X 400 400line 70.1 31.5

VGA

-- Yes - -

DVI

- - - - - - Neg. Neg. Yes 1 640X400

Compatible 2 720 X 400 400line 70.1 31.5 - - Yes - - (DVI-PC) - - Yes - - Neg. Neg. Yes 1 720X400

Computers

--s

Y-

---s

3583

720 X 350 350line 70.1 31.5 - - Yes - - - - Yes - - Neg. Neg. Yes 1 720X350

5 640 X 480 VGA 59.9 31.5 Yes Yes Yes Yes Yes Yes Neg. Neg. Yes 2 640X480

eYs

.73

.276

eYs

5.73577

eNs

3.34588

----

eY.

eYs

1.154

019

eYs

3.164.02101

11 848 X 480 Wide-VGA 084X8

82se

P.soP

-se

Y-

306

852 X 480 Wide-VGA 60 31.7 - - Yes - - - - Yes - - Neg. Neg. Yes 2 852X480

13 800 X 600 SVGA 56.3 35.2 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

eYse

Yse

seY9.733.0641

eYse

Yse

YseY

.842.27

----

Y.s

P.s

eYs

eYse

9.645

761

.351.58

eY.s

oP.s

seYse

eYseYseY368.9981

----

eY.so

.soP

eYs

eYse

seYseY7.5702191

20 1024 X 768 XGA 60 48.4 Yes Yes Yes Yes Yes Yes Neg. Neg. Yes 3 1024X768

5se

.geN

Yse

seY

eYse

YseYseY9.759.1722

Neg. Neg.

Yes 6 1024X768

----

eY.s

P.s

eYs

eYseYseY065732

P.s

seYseYseY7.865842

----

eYs

YseYseYseY5.086.00152

eYse

5.594

.911

27 1152 X 864 XGA 60 53.7 Yes Yes Yes Yes Yes Yes Pos. Neg. Yes - - - -

YseYseYs

.462782

P.s

seYseYseYseY5.765792

1280 X 768 Wide-XGA 56.2 45.1 - - Yes - - - - - - - - Pos. Pos. Yes - - - -

seY

---seY

-848.95

eY.s

seY----seY

-8.749.9523

eY.s

seY----seY

-658.9633

867X08

16se

P.geN--se

Y-

---seY--8.752743

1280 X 800 Wide-XGA

59.8 49.7 - - Yes - - - - Yes - - Neg. Pos. Yes 4 1280X800

36 1280 X 854 Wide-XGA 60 53.1 - - Yes - - - - Yes - - Neg. Neg. Yes - - - -

37 1280 X 960 Wide-XGA 60 60 Yes Yes Yes Yes Yes Yes Pos. Pos. Yes - - - -

----

eY.s

.so

seYseYseY2

Y2*seY2*se

.58

39 1360 X 768 Wide-XGA 60 47.7 - - Yes - - - - Yes - - Pos. Pos. Yes 3 1360X768

1376 X 768 Wide-XGA 59.9 48.3 - - Yes - - - - Yes - - Neg. Pos. Yes 3 1376X768

41 1280 X 1024 SXGA

60 64 Yes *1 Yes Yes Yes *1 Yes Yes Pos. Pos. Yes 9 1280X1024

----seY.

soP.soP

seYs

1*s

Yse

Y1*seY08572

----

eY.so

seYseY1*seY2*

seY2*seY2*1*seY1.19583

.soP.

---

-2*seY

*seY2*1*seY5.8011.00144

1400 X 1050 SXGA+ 60 64 Yes Yes Yes Yes Yes Yes Neg. Pos. Yes 9 1400X1050

Yse

.56

Neg. Pos.

Yes 7 1400X1050

soP.ge

2*seY2*

2*s

Y3.289

seY.

.ge

N---

-2*seY

Y2*se

Y9.3958

1680 X 1050 Wide-SXGA

60 65.3 - - Yes - - - - Yes - - Neg. Pos. Yes 7 1680X1050

1600 X 1200 UXGA

60 75 Yes *2 Yes *2 Yes *2 Yes Yes Yes Pos. Pos. Yes 8 1600X1200

eY.soP.soP---

---

2*s

Y3.

--se

P.soP------2*seY2*seY2*seY5

0725

--se

.so

soP--

---2

seY2*seY2*se

95735

---

seY

.so

P.so

------2*seY2*seY2*seY3

15845

55 1920 X 1080 50 56.2 - - - - - - - - Yes - - Pos. Pos. Yes - - - -

---seY.so

P.so

Y-

-5.

1920 X 1200 Wide-UXGA

59.9 74.6 - - Yes *2 - - - - - - - - Neg. Pos. Yes 8 1920X1200

58 1920 X 1200RB Wide-UXGA --

-seY.soP.geN--se

----2*seY--4706

Apple Macintosh® 81

640 X 480 Mac13"

66.7 35 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

82 832 X 624 Mac16"

74.6 49.7 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

83 1024 X 768 Mac19" 74.9 60.2 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

84 1152 X 870 Mac21"

75.1 68.7 Yes Yes Yes - - - - - - Sync on G Sync on G - - - - -

85 1440 X 900 Apple17 59.9 55.9 - - Yes - - - - Yes - - Neg. Pos. Yes - - - -

EWS Series 91 Work Station EWS4800 60 64.6 Yes *1 Yes Yes Yes *1 Yes Yes Neg. Neg. Yes - - - -

1280 X 1024

71.2 75.1 Yes *1 Yes Yes Yes *1 Yes Yes Neg. Neg. Yes - - - -

1280 X 1024 HP 72 78.1 Yes *1 Yes Yes Yes *1 Yes Yes - - - - - - -

1152 X 900 SUN

66 61.8 Yes Yes Yes Yes Yes Yes C Sync C Sync - - - - -

1152 X 900 76 71.7 Yes Yes Yes Yes Yes Yes C Sync C Sync - - - - -

1280 X 1024

76.1 81.1 Yes *1 Yes Yes Yes *1 Yes Yes C Sync C Sync - - - - -

97 1024 X 768 SGI

60 49.7 Yes Yes Yes Yes Yes Yes - - - 4 1024X768

1280 X 1024 60 63.9 Yes *1 Yes Yes Yes *1 Yes Yes - - - - - - -

atig

Dgol

anA

EZI

- - NORMAL (4:3) FULL (16:9) ( *1) (*2)

Not Supported 1024 pixels x 768 lines 1366 pixels x 768 lines Aspect ratio is 5 :4 (960x768 ) Rough Sampling

English-36

60XC10 Supported Resolutions (Video)

Specification of the signal

Sig.

DNU

ANY

UFLA

53.

41M

PNI

fVn

no.

H X V Signal Type

(kHz) terminal (4:3) (16:9)

(non-linear)

SCAN terminal (4:3) (16:9)

(non-linear)

SCAN Gr. No. Item Item

Video 101

3.58NTSC 59.9 15.8 Video1

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - - - - - - - - - - - - - - - -

Composite / S 102 4.43NTSC

59.9 15.8

S-Video

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - - - - - - - - - - - - - - - -

103 PAL --

--------

seY

Yse

104

PAL60

----

seY

105

PAL-N

-------

510

106 PAL-M

----

------

eYs

Yse

.95

107 SECAM

----

3*s

Y6.5

Y,Pb(Cb),Pr(Cr) SD

111

480I 59.9 15.8 DVD/HD1 Yes Yes Yes Yes Yes Yes Yes *3 - - - - - - - - - - - - - - - - - - - -

112

576I

50 15.6

DVD/HD2

Yes Yes Yes Yes Yes Yes Yes *3 -- -- -- -- -- -- -- -- -- - -

113 480P

----

3*s

Yse

.13

.95

114

576P

eYse

115

720P -

----

3*s

eYs

----se

--5.

116

720P --

-------

3*se

eYseY--5406

117 1080I -

----

eYs

----s

-1

.8205

118 1080I

---

eYseY

-8.3306

119

1080P -

---

3*s

-se

3.6505

120 1080P -

3*s

eYs

-se

--5.760

121 1080P

----

3*s

eYs

eYseY

-8.3303

122 1080P

Y--

123 1080P

----

---

--s

--8252

RGB(Video signal) SD 131 480I *4 59.9 15.8 VGA Yes Yes Yes Yes Yes Yes Yes *3 - - - - - - - - - - - - - - - - - - - -

132

576I *4

50 15.6

(SCART1-2)

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - - - - - - - - - - - - - - - -

133 480P

842

-------

134 576P

-------

*se

Yse

Y3.1305

135 720P --

---------

3*se

seY

eYseY

-5

136 720P

---

3*s

Y-

-5

137 1080I --

--------

seYseY--1.8205

138 1080I

3*s

eYs

--se

Y-

-8

139 1080P -

3*s

eYs

----s

Y-

-3

.6505

140

1080P

---

-s

Y-

-5

141

1080P -

---

3*s

-s

--8.3303

142

1080P

-----

----

-s

Y-

-7

143 1080P --

-------

seY----

--8252

144 1080A/540P RCA STB P

-------

seY----seYseY

-8.3

Digital SD 161

640 X 480P

59.9 / 60.0 31.5 / 31.5 - - - - - - - - - - - - - -

DVI

Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 Yes *3 - - - - - -

(EIA/CEA-861) 162 720 (1440) X 480I

59.9 / 60.0 15.7 / 15.8 - - - - - - - - - - - - - -

(DVI-HD)

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

163 720 X 480P 59.9 / 60.0 31.5 / 31.5 - - - - - - - - - - - - - - Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

164 720 (1440) X 576I

---

----

.5105

DVD/HD3

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

165 720 X 576P -----------

-3.1305

(HDMI)

Yes Yes Yes Yes Yes Yes Yes *3 - - - - - -

166

1280 X 720P

59.9 / 60.0 45.0 / 45.0 -- -- -- -- -- -- -- -- Yes Yes -- -- Yes Yes *3 -- -- - -

167

1920 X 1080I

59.9 / 60.0 33.7 / 33.8 - - - - - - - - - - - - - - - - Yes Yes - - - - Yes Yes *3 - - - - - -

168 1920 X 1080P 59.9 / 60.0 67.4 / 67.5 - - - - - - - - - - - - - - - - Yes Yes - - - - Yes Yes *3 - - - - - -

169

1280 X 720P

---3*s

Y-

---------5.7305

170 1920 X 1080I

----3*s

Y----s

-----------

--1.8

171 1920 X 1080P --

-3*s

Y-

-----

----

----3.6505

172 1920 X 1080P -

3*s

Y----

Y--

----

8.3303

173 1920 X 1080P

Y----s

Yse

-----------

----7

242

174 1920 X 1080P --

3*se

eY-

-se

Y---

---

----

8252

Native 191 1366 X 768 --

--------

Y-

------

-----

.7406

Resolution 192 1024 X 768

----

-3

seY----

---

----

-3.7406

193 853 X 480

----

Y-

--------------0306

RGB select

golan

SIZE

- - NORMAL (4:3) FULL (16:9) (*3) (*4)

Not Supported 1024 pixels x 768 lines 1366 pixels x 768 lines Displayed by Underscan mode (100%) SCART input available

English

English-37

Pin Assignment

1) Analog RGB Input (Mini D-SUB 15P) VGA

Pin No. Name

1 Video Signal Red

2 Video Signal Green

3 Video Signal Blue

4 GND

5 DDC-GND

6 Red-GND

7 Green-GND

8 Blue-GND

9 +5V (DDC)

10 SYNC-GND

11 GND

12 DDC-SDA

13 H-SYNC

14 V-SYNC

15 DDC-SCL

2) Digital RGB Input (DVI-D) DVI

1 TX2- 9 TX1- 17 TX0-

2 TX2+ 10 TX1+ 18 TX0+

3 Shield (TX2/TX4) 11 Shield (TX1/TX3) 19 Shield (TXP/TX5)

4NC 12NC 20NC

5NC 13NC 21NC

6 DDC-Serial Clock 14 +5 power 22 Shield (TXC)

7 DDC-Serial Data 15 Ground (+5V) 23 TXC+

8 NC 16 Hot Plug Detect 24 TXC-

3) RS-232C Input

(D-SUB 9P)

Pin No. Name

1 Connected to 7 & 8

2 RXD

3 TXD

4 Connected to 6

5 GND

6 Connected to 4

7 Connected to 1 & 8

8 Connected to 1 & 7

9NC

D-SUB 9P

DVI-D

Mini D-SUB 15P

DECLARATION OF CONFORMITY

 is device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1)  is

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Blvd. Suite 1100

Itasca, IL 60143

Tel. No.: (630)467-3000

Type of Product: Computer Monitor

Equipment Classi cation: Class B Peripheral

Model: PlasmaSync 42XC10 (P426Y3)

PlasmaSync 50XC10 (P506Y4)

PlasmaSync 60XC10 (P606Y5)

We hereby declare that the equipment speci ed above

conforms to the technical standards as speci ed in the FCC Rules.

HDMI, the HDMI logo and High-De nition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

Windows is a registered trademark of Microso Corporation. NEC is a registered trademark of NEC Corporation.

All other brands and product names are trademarks or registered trademarks of their respective owners.

Declaration of the Manufacturer

We hereby certify that the color monitor

P426Y3, P506Y4 or P606Y5 is in compliance

with Council Directive 73/23/EEC:

– EN 60065

Council Directive 89/336/EEC:

— EN 55022

— EN 61000-3-2

— EN 61000-3-3

— EN 55024

and marked with

NEC Display Solutions Ltd.

4-13-23, Shibaura,

Minato-Ku

Tokyo 108-0023, Japan

WEEE Mark (European Directive 2002/96/EC)

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products

carrying the mark (le ) must be disposed of separately from normal household waste.  is includes monitors and

electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products,

please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable,

follow any agreements made between yourself and NEC.  e mark on electrical and electronic products only applies

to the current European Union Member States.

 e mark on electrical and electronic products only applies to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your

local authority so as to comply with the correct disposal method.

NEC P60XC10 60" Residential Plasma Display

Product's Documents

User Manual

Specifications

NEC P60XC10 Questions and Answers