Loading ...
Loading ...
Loading ...
To turn the kettle off before the boiling cycle is complete, lift the
On/OffSwitchtotheOFF(‘O’)position.
7. The Lid should not be opened when the Kettle is hot.
8. If you want to use the Kettle again, allow the thermal safety switch to
cool down for 15 to 20 seconds then depress the On/Off Switch to the
ON(‘I’)position.IftheOn/OffSwitchdoesnotremainin
theON(‘I’)position,thewaterishotenoughtousewithoutreheating.
9. Only grip the Kettle by the Handle as all other surfaces will be hot.
10.Return the Kettle to the Base or a heat resistant surface after use.
11.IMPORTANT: If the Kettle is accidently switched on when empty,
the thermostat will automatically cycle on and off to prevent the Kettle
from overheating. If this situation occurs, press the On/Off switch
totheOFF(‘O’)positionandunplugtheKettleimmediately.Letthe
Kettlecoolbeforerelling.
12.DISCONNECT the Power Cord from the wall outlet when not in use.
CARE AND CLEANING
All servicing, other than cleaning, should be performed by an authorized
service representative. See Warranty section.
Exterior
-Use a soft, damp cloth to clean the exterior.
-DO NOT use abrasive cleaners. Dry exterior thoroughly before use.
-DO NOT immerse kettle or power base in water or other liquid.
Descaling
Under normal use, scale build-up will form on the inside of the kettle and
will coat the stainless steel plate. Scale, which has accumulated inside
the kettle must be removed by boiling equal parts of white vinegar and
water (500ml/ 2 cups of each is recommended). Once the water has
boiled, allow the mixture to stand several hours or overnight. Empty
outmixtureandllkettletotheMAXlevelwithfreshwater.Bringwater
to a boil and discard. For heavy scale build-up, use a solution of pure
vinegar,andletstandovernight.Emptyoutvinegarandllkettletothe
MAXlevelwithfreshwater.Bringwatertoaboilanddiscard.
This descaling process should be repeated once a month.
NOTE: Scale build-up can be delayed by pouring out water after use
thenrellingthekettlewhenrequired.
4
Loading ...
Loading ...