Loading ...
Loading ...
16.Do not use Kettle without the Lid in place.
17.Scalding may occur if Lid is opened while the Kettle is hot.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2bladesand1pin).Iftheplugdoesnottfullyintotheelectricaloutlet
contactaqualiedelectrician.Donotmodifythepluginanywayoruse
an adaptor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Waterboiledforthersttimeshouldbediscarded.
HOW TO USE
1. Open the Lid by holding the kettle handle and pressing the button that
is on the inside of the handle. Fill the kettle through the lid opening
with a minimum of 2 cups (500 ml) of water.
2. DO NOTattempttolltheKettlewhileitispluggedintothewalloutlet.
DO NOT use for other than boiling water. Other liquids will
contaminate the interior of the kettle.
DO NOTllpasttheMAXlevelindicatedinthewaterlevelwindow.
Overllingmaycausewatertospitoutwhenboiling.
3. Close the Lid. Ensure that it snaps tightly into place.
4. Place Kettle on a level, dry, heat resistant surface.
5. Plug into a 120V AC wall outlet.
NOTE:
- Never plug kettle into an electrical outlet when the kettle is empty.
- Direct kettle spout away from cabinets, walls, etc. to prevent
possible steam damage.
6. DepresstheOn/OffSwitch(‘I’/’O’)andtheredindicatorlightwill
light up to indicate that the Kettle is in the boil cycle. Once the
waterhasboiled,theOn/OffSwitchwillmovetotheOFF(‘O’)
position and the light will go out. IMPORTANT: The kettle
shuts off automatically only after the boiling cycle is complete.
If the kettle is removed from the base before the boiling cycle is
complete then it will begin to heat as soon as it is put back on
the base.
3
Loading ...
Loading ...
Loading ...