Loading ...
Loading ...
Loading ...
RECOMMENDED ACCESSORIES
Use only accessories recommended for this drill press.
Follow the instructions that accompany the accessories. Use
of improper accessories may cause hazards.
Visit your Sears Hardware Department or see the Craftsman
Power and Hand Tools Catalog for the following accessories:
• Drill bits
• Hold-Down Clamps
• Drill press Vises
Use only accessories designed for this drill press to avoid
injury from broken parts or thrown workpieces.
Sears may recommend other accessories not listed in this
manual. See your nearest Sears store or Power and Hand
Tool Catalog for all other accessories.
Do not use any accessory unless you have completely read
the instruction or operator's manual for that accessory.
UNPACKING AND CHECKING CONTENTS
If any part is missing or damaged, do not plug the drill press
in until the missing or damaged part is replaced, and
assembly is complete.
Carefully unpack the drill press and all its parts, and compare
against the list below.
To protect the drill press from moisture, a protective coating
has been applied to the machined surfaces. Remove this
coating with a soft cloth moistened with kerosene or WD-40.
To avoid fire or toxic reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar highly volatile solvents to
clean the drill press.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A. Head assembly 1
B. Table 1
C. Base 1
D. Column assembly 1
Loose parts bag:
E, Feed handle
F. Lock handle
G. Worm gear
H. Crank Handle
I. Crank arm
J. Hex bolts
K. Fence assembly
L. Triangle knobs
M. T-Block
N. Washer
O. Hex wrenches
P. Wedge
Q. Arbor
3
1
1
1
4
1
2
2
2
3
1
1
Box:
R. Chuck key
S. Chuck
Loading ...
Loading ...
Loading ...