Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
For your own safety, never connect plug to power
source outlet until all assembly and adjustment steps
are completed, and you have read and understood the
safety and operating instructions.
TOOLS NEEDED
Slottedscrewdriver
Combinationwrench
[ F ; I I I I I K L I
Framing square
8" & 10" Adjustablewrenches
Socket wrench
with 23 mm. socket
Combination square
The Drill Press is very heavy and MUST be lifted with
the help of 2 PEOPLE OR MORE, to safety assembly
it.
COLUMN SUPPORT TO BASE (FIG. A)
1. Position the base (1) on the floor.
2. Place the column (2) on the base, aligning the
holes in the column support with the holes in the
base.
3. Locate the four long hex bolts (3) from the loose
parts bag.
4. Place a bolt in each hole through the column
support and the base. Tighten with an adjustable
wrench.
TABLE ASSEMBLY TO COLUMN SUPPORT
(FIG. B THROUGH I)
1. Locate the worm gear, table crank arm, crank
handle, and table support lock handle from the loose
parts bag.
2. Loosen the set screw (1) in the column collar (2).
Remove the collar and the rack (3) from the column.
Fig. B
3. Remove the large hex bolt (4) with the 23mm socket
wrench from the table assembly, Remove the table
(5) from the table support (6).
Fig. C
5 4
4. Insert the worm gear (7) into the table crank handle
hole (8) from inside the table support (6). Make sure
the worm gear meshes with the inside gear.
5. Insert the table support lock handle (9) into the hole
(10) at the rear of the table support.Tighten.
Fig. D
Loading ...
Loading ...
Loading ...