Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
9
ASSEMBLY INSTRUCTIONS
Pour the box of lava rocks into the rebowl.
CAUTION
To ensure proper function, the guard on
this burner should be free of lava rocks at all.
OPERATION
Before performing a leak test, be sure that no sparks can occur and you are in a
spacious outdoor area. Connect the propane gas tank to the regulator and turn
the valve on the unit to the “o” position. Spray or brush a soap and water mixture
on all connections. Turn the gas supply on; if bubbles occur on any connection
there may be a leak. If you smell gas or a leak is discovered turn the gas valve
o, disconnect propane gas tank and do not use the appliance until the leak
is repaired.
Do not use the heating unit without inspecting the gas hose. If there are signs of
wear or abrasion you must replace the hose (if applicable). Pumice stones/lava
rocks/LavaGlass could pop up and strike somebody’s face during the process of
lighting this unit; stand away from the unit for the rst 20 minutes after igniting.
Flame height should be a yellow/blue color between 2 - 10 inches in height.
Wait 50 minutes after extinguishing ame prior to placing a lid (if applicable) or
protective cover on heating item.
To Light
1. Make sure the control knob is in the “OFF” position.
2. Open the door and slowly open the valve on the propane gas tank by turning
the knob counterclockwise.
3. Close the door on the body.
4. Push and hold in the electronic ignitor to create sparks within the electrode,
continue to hold.
Loading ...
Loading ...
Loading ...