SereneLife SLFPLG9.3 Propane Gas Fire Pit

User Guide - Page 10

For SLFPLG9.3. Also, The document are for others SereneLife models: SLFPLG9

PDF File Manual, 14 pages, Read Online | Download pdf file

SLFPLG9.3 photo
Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
10
5. Push in the control knob and turn to the HIGH position. Keep holding down
the control knob to allow gas to fow for 15 seconds.
6. If ignition doesn’t occur within a few seconds release the control knob and rotate
to the OFF position. Wait for 5 minutes for gas to clear and then repeat the
above lighting instructions.
7. Once the re is lit, the ame intensity may be controlled by turning the control
knob between the LOW and “HIGH positions.
To Extinguish
1. Turn control knob clockwise to the HIGH position; let the knob pop up and
continue turning the control knob to the OFF position.
2. Close the cylinder valve on the propane gas tank if you dont intend to use it for
a long time.
MAINTENANCE
Before performing any maintenance always disconnect propane gas tank.
Store your product indoors during winter months. Avoiding extreme cold
temperatures will prevent exposure damage.
Keep the heating item free and clear from combustible materials.
Visually inspect burner for obstructions and keep tank enclosure free and clear
from debris.
Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner
and pumice stones/lava rocks/Lava Glass are completely cooled down.
Wipe down with a soft cloth.
Harsh weather conditions may cause stubborn stains, discoloration and possibly
rust pitting.
Permanent damage may occur if powder or solvent comes in contact with painted
or plastic components on this heating unit.
• Keep the heating unit stored away from direct sunlight.
• If storing this unit inside, disconnect the propane gas tank from the gas valve.
• Not using manufacturer approved or supplied parts/accessories may result in a
defective condition and void the warranty of this heating unit.
• If desired, cover re pit to protect exterior surfaces and to help prevent build-up
in air passages.
Note: Wait until re pit is cool before covering.
Loading ...
Loading ...
Loading ...