Loading ...
Loading ...
Loading ...
Maintenance
- Do notwipe thisdevice with oil because itmay deteriorate the exterior or damage the paint. Contact with rubber orethylene products for a long time may cause stains on thisdevice.
- Ifthe outside of the AWOL VISION 4K TriChroma laser isdirty, turn off the projector and wipe with adamped soft cloth.
- Do nottouch thelens with yourhands.
- Do not touch or wipe the lens with an ordinary cleaning cloth. Use a dust blower to remove the dust on the lens. Grease, dirt and fingerprints should be cleaned carefully by using an
optical cleaning cloth, lens wiping paper or professional cleaning solutions to avoid destroying the optical filming and affecting the image quality.
- Toturn off this device, press the [Power] button on the remote control. Do not cut off the power directlywhen the device isworking.
Troubleshooting
Please check the following table to see if you can find the cause of the failure you encountered.
When you are convinced that you have followed these instructions and still cannot fix the problem, you may consider contacting a professional service provider for repair.
Problem Solution
The light output of theTriChroma
laser is disabled.
In this case, if the power indicator illuminates a red light 5 times, please
check whether the foreign object detection window is covered or dirtied. If
so, uncover or carefully clean the foreign object detectionwindow.
Loading ...
Loading ...
Loading ...