Ancona AN1519 User Manual

Loading ...

— 15 —

Installation

STEP 14

Install Filters

To install lters, view the following four steps (See Figure # 6):

• Angle the lter into slots at the back of the hood.

• Push the button on handle of the lter.

• Release the handle once the lter ts into a resting position.

• Repeat to install all lters.

Cleaning Filters

IMPORTANT: Drain oil from bafes, spacers, lters, oil tunnels, oil containers before oil and residue overow!

• Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.

• Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.

• Dry thoroughly before replacing and follow directions for installation in reverse.

• Filters should be cleaned after every 30 hours of use.

• Should lters wear out due to age and prolonged use, replace with a new lter.

Fig. #6

Fig. #5

Loading ...

Ancona AN1519 30 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood