Ancona AN1519 User Manual

Loading ...

— 13 —

Installation

STEP 10

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the lower

mounting bracket. (See Figure # 3)

• Screw the range hood to the wall.

CAUTION - Make certain the range hood is secure

before releasing!

STEP 9

Venting

• Fixthedamperaponthetopventofhood.

• If ventilation system is equipped with an external air

duct with a different diameter, apply a reduction tting.

However, for maximum performance and safety, a 6 in.

round ducting is recommended.

Fig. #2

Fig. #3

STEP 11

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

STEP 12

Install Chimney

• Place chimney on top of the main housing.

• Remove the protective coating from the upper chimney. Carefully slide the upper

chimney down into the lower chimney.

• Use two screws to x the two chimneys together with the lower chimney bracket, make

sure upper chimney is moving freely. (See Figure # 4)

Fig. #4

Loading ...

Ancona AN1519 30 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood