1. The machine lid has a protective device, if the top head is not
covered correctly and completely, the machine will not be able
to start.
2. Please place on an even surface. If it is placed on an uneven
surface the vibrations may be annoying.
3. The height of the ice in the trough should reach 1cm below the
red line.
4. Please clean the trough after use.
5. Please do not touch the blade to prevent yourself from getting hunt.
6. Do not dismantle the machine for cleaning.
Ice Shaver
Operation Manual
To continuously improve its products, VIVOHOME reserves the right to modify this
information without prior notification.
Please contact customer service via
with any questions,
comments, or concerns. Thank you for using VIVOHOME products in your home!
NOTE:
AMAZON
VIVOHOME
INSTAGRAM
@VIVOHOME.OFFICIAL
FACEBOOK
@VIVOHOME.OFFICIAL
support@vivo-home.com
Thank You For Purchasing From
VIVOHOME
IV.Notes
enjoy the summer
1. Ice Drawer
4. Blade adjuster 5. Base
2. Power switch 3. Exit for ice
Technical Parameters
Operational Instructions
If the machine becomes jammed by ice, turn
the switch to Reverse!
1. Open the lid, clean the ice trough with dry towel, check whether the blade is installed
firmly.
2. Check whether there is damage to the power line and the plug, any leakage, if contact
is good, close the switch, insert the power source.
3. Open the machine lid, insert the right amount ice pieces then cover the top head.
4. Press down the start switch in the front of the machine.
5. According to your needs adjust the blade to create different thickness of ice.
6. Ice with the diameter of 3-5cm works best, but you can also use large ice chunks if
crush them into smaller pieces.
1. Ice Drawer
4. Blade adjuster 5. Base
2. Power switch 3. Exit for ice
Technical Parameters
Operational Instructions
If the machine becomes jammed by ice, turn
the switch to Reverse!
1. Open the lid, clean the ice trough with dry towel, check whether the blade is installed
firmly.
2. Check whether there is damage to the power line and the plug, any leakage, if contact
is good, close the switch, insert the power source.
3. Open the machine lid, insert the right amount ice pieces then cover the top head.
4. Press down the start switch in the front of the machine.
5. According to your needs adjust the blade to create different thickness of ice.
6. Ice with the diameter of 3-5cm works best, but you can also use large ice chunks if
crush them into smaller pieces.
1. The machine lid has a protective device, if the top head is not
covered correctly and completely, the machine will not be able
to start.
2. Please place on an even surface. If it is placed on an uneven
surface the vibrations may be annoying.
3. The height of the ice in the trough should reach 1cm below the
red line.
4. Please clean the trough after use.
5. Please do not touch the blade to prevent yourself from getting hunt.
6. Do not dismantle the machine for cleaning.
Ice Shaver
Operation Manual
To continuously improve its products, VIVOHOME reserves the right to modify this
information without prior notification.
Please contact customer service via
with any questions,
comments, or concerns. Thank you for using VIVOHOME products in your home!
NOTE:
AMAZON
VIVOHOME
INSTAGRAM
@VIVOHOME.OFFICIAL
FACEBOOK
@VIVOHOME.OFFICIAL
support@vivo-home.com
Thank You For Purchasing From
VIVOHOME
IV.Notes
enjoy the summer
