Loading ...
Loading ...
Loading ...
10
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
mCAUTION! Do not install the battery before fully
assembling the unit.
mWARNING! Mount the components very carefully so
as not to impair the safety and eciency of the machine. If in
doubt, please call the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563).
The equipment comes fully assembled. Fasten it securely
to a suitable surface (e.g., a work-bench) in a suitable place
(protected against dust, dry, well-lit) and it's ready for using.
1. Position the machine at a suitable surface. Push it onto
the surface as far as possible until the mounting stop on
the bottom prevent the machine from going any further
(Fig. 4).
NOTE: It's recommended to mount the machine at chest
height for best visibility and easy operation.
2. Insert two M8 bolts into the mounting holes on both
sides (Fig. 5). Tighten to secure the machine on the
mounting surface.
Operation
This cordless chain saw sharpener is used to sharpen the
individual teeth on a saw chain blade. The unique adjustments
of the machine allow you to set the proper depth and angle
for accurately sharpening the teeth. By following a basic setup
procedure you can accurately use this chain saw sharpener.
Before sharpening the saw chain, gather the correct
specications for the saw chain you are going to sharpen on
this cordless chain saw sharpener. These specications can be
found on the box or package that the saw chain came in when
you rst purchased it.
mWARNING! There is a risk of serious personal injury for
the operators and the bystanders from improper sharpened
saw chain. Read and follow all manufacturer's instructions for
your saw chain.
mWARNING! All adjustments must be made prior to
inserting the battery.
Position the Saw Chain
1. Clean the chain before sharpening it. Wash it with a non-
ammable solvent. Don't use gasoline to dry the chain.
2. Lift up the chain stop and position the chain in the chain
guide. Lower the chain stop so that it is positioned on the
tooth you want to start with. (Fig. 6).
NOTE: It's recommended to mark the rst chain tooth you
start with.
Fig. 4
Mounting
surface
Mounting
stop
Fig. 5
Mounting
holes
Loading ...
Loading ...
Loading ...