Loading ...
Loading ...
Loading ...
PROBLEM
TROUBLESHOOTING CHART
CAUSE
Excessive
vibration
Starter rope hard
to pull
Lossofddve
Grass catcher
not filling ('Ifso
equipped)
Hardtopush
1. Wom, bent or loose blade.
2. Bent engine crankshaft.
1. Engine flywheelbrake ison
when controlbar is released.
2. Bent engine crankshaft.
3. Blade adapter broken.
4. Blade dragging in grass.
1. Drive wheels not tuming
withdrive control engaged.
2. Belt not driving
1. Cutting height too low.
2. Lifton blade wom off.
3. Catcher not venting air.
1. Grass is too high or wheel
height istoo low.
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
nght for you.
CORRECTION
1. Replace blade. lighten
blade bolt.
2. Contact an authorized
service center.
1. Depress control bar to
upper handle before
pulling starter rope.
2. Contact an authorized
service center.
3. Replace blade adapter.
4. Move lawn mower to cut
grass or to hard surface.
1. Adjust or replace drive control
cable.
2. PUt belt on pulleys or
replace belts if broken.
1. Raise cutting height.
2. Replace blade.
3. Clean grass catcher.
1. Raise cutting height.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
i4. Adjust handle height to
suit.
18
Loading ...
Loading ...
Loading ...