Loading ...
Loading ...
Loading ...
6
PRODUCT INSTALLATION (cont.)
INSTALLING THE BIDET ATTACHMENT (cont.)
Step 2c
2. Turn o water supply valve and flush toilet.
a. Turn o water supply at the wall to stop flow of
water.
b. Flush toilet and hold down handle to completely
empty toilet tank.
c. Disconnect water supply hose from the fill valve
under the toilet tank.
3. Connect 7/8” T-Valve to Water Supply Line and Fill
Valve Under Toilet Tank.
a. Install the 7/8” T-valve with included rubber
washer to the incoming water connection on
the bottom of your toilet tank. Ensure the rubber
washer is properly seated, tapered side up.
b. Connect the cold water supply line coming from
the wall to the bottom of the T-valve.
4. Connect the Bidet Hose to the T-Valve.
a. The ends of the bidet hose are two dierent
sizes. Determine which is the smaller of the two
ends.
b. Connect the smaller end of the braided metal
bidet hose to the remaining open side of the
installed T-valve.
Step 3a
Step 3b
Step 4b
Loading ...
Loading ...
Loading ...