Ariens 96136000600 lawn mower

User Manual - Page 13

For 96136000600.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
,/_ WARNING: To avoid serious injury, Mowing
f"_4
before performing any service and , ,
adjustments: _ ,,
1. Release control bar and stop engine.
2. Make sure the blade and all moving
parts have completelystopped.
3. Disconnect spark plug wire from spark
plug and place wire where it cannot Hairpin
come in contact with plug.
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See "TO ADJUST CUTTING HEIGHT" in
the Operationsection of this manual.
REAR DEFLECTOR
The rear deflector, attached between the
rear wheels of your mower, is provided to
minimize the possibilitythat objects will
be thrown out of the rear of the mower
into the operator mowing position. If the
deflector becomes damaged, itshould be
replaced.
TO ADJUST HANDLE
The handlecan be mounted in a high or
low position. The mountingholes in the
bottom oflower handleare off center for
raising or lowering the handle.
1. Remove upper handle andall wire
tie(s) securingcable(s) to lower handle.
2, Remove hairpin cotters from lower
handlebracket mounting pin,
3. Squeeze lower handle in to remove it
from mounting pins.
4. Turn lower handle over to raise or
lower handle.
5. Squeeze lower handle in and position
holes onto mounting pins on handle
bracket.
6. Reassemble upper handle and atl
parts removed from lower handle.
SQUEEZE
TO ADJUST
Hairpincotter
Mowing /_
position , ,
,/
Mounting bracket
pin LOW POSITION HiGH POSITION
Lower
handle.___
ENGINE ROTATE_ _
ENGINE SPEED
Your engine speed has been factoryset.
Do not attempt to increase engine speed
or it may result in personal injury. If you
believe that engine is running too fast or
too slow, take your mower to a qualified
service center for repair and adjustment.
CARBURETOR
Your carburetor isnot adjustable. If your
engine does not operate properly due to
suspected carburetor problems, take your
lawn mower to a qualified service center
for repair and/or adjustment.
IMPORTANT: Never tamper with the
engine governor, which is factory set for
proper engine speed. Overspeeding
the engine above the factory high speed
setting can be dangerous. If you think
the engine-governed high speed needs
adjusting, contacta qualified service
center,which has proper equipment and
experience to make any necessary adjust-
ments.
13
Loading ...
Loading ...
Loading ...