Loading ...
Loading ...
Loading ...
– 1
Before using your appliance for
the first time, read these original
operating instructions, act in
compliance with them, and keep them for lat-
er use or for subsequent owners.
In the event of missing parts or any trans-
port damage, please contact your dealer.
– The machine with working equipment
must be checked to ensure that it is in
proper working order and is operating
safely prior to use. Otherwise, the appli-
ance must not be used.
– The machine may not be modified.
– Never reach your hands into the high
pressure jet.
– Never direct the high pressure jet on
persons or animals.
Information on ingredients (REACH)
The latest information on ingredients can
be found under:
www.kaercher.de/REACH
– The foam set is used to clean and disin-
fect floors and wall surfaces and ma-
chines with a high pressure cleaner.
– Adding 5% of a cleaning solution is suf-
ficient.
– The water pressure must not exceed 25
MPa (250 bar).
– The water temperature must not ex-
ceed 50 °C during foam operation.
– The water flow must be at least 500 l/h
(8.3 l/min).
– The high pressure hose must not be
longer than 15 m.
– The use of cleaning agents containing
chlorinated alkalies leads to increase
wear and tear of the appliance.
– The injector suctions cleaning agents
and mixed them into the water stream.
– This suction effect will only be created if
the included round jet nozzle is integrat-
ed in the foam nozzle.
Switch off the high pressure cleaner.
Interrupt current and water inflow.
Activate trigger gun until device is pres-
sure-less.
1O ring
2 Injector
3 Injector insert
4 Adapter
Slide O rings onto the injector insert and
coat lightly with silicone grease.
Slide injector insert into the injector and
tighten fingertight using a 12x2 flat tip
screwdriver.
Screw on adapter and tighten.
Safety instructions
Application
Operations
Environmental protection
The packaging material can be
recycled. Please do not place the
packaging into the ordinary re-
fuse for disposal, but arrange for
the proper recycling.
Old appliances contain valuable
materials that can be recycled.
Please arrange for the proper re-
cycling of old appliances. Batter-
ies, oil, and similar substances
must not enter the environment.
Please dispose of your old appli-
ances using appropriate collec-
tion systems.
Proper use
Assembly
Install the injector
7EN
Loading ...
Loading ...
Loading ...